Storage Queries

For classic Porsche 911 content

Moderators: hot66, impmad2000, Barry, Viv_Surby, Derek, Mike Usiskin

911hillclimber
Nurse, I think I need some assistance
Posts: 20723
Joined: Mon Mar 10, 2008 6:26 pm
Location: West Midlands

Re: Storage Queries

Post by 911hillclimber »

I've never long time stored, but have used an exterior quality Carcoon twice and had real corrosion on exposed surfaces like brake discs etc.
Still in long term storage in my shed...never again for winter car storage, but might be useful in the end for summer outside.
73T 911 Coupe, road/hillclimber 3.2L
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9
DarthMJH
I luv DDK!
Posts: 893
Joined: Sun Oct 09, 2011 10:47 am
Location: NW London

Re: Storage Queries

Post by DarthMJH »

Thanks all for your advise, I have informed the storage facility not to start the car.

Its in an industrial estate, and the unit has dehumidifiers in there so should be no condensation. I went to one storage company and they didnt use dehumidifiers, but as Angus mentioned the concrete is so think (ex MOD site) they said they didnt need it. They must be doing something right as the first 3 cars I saw were Ferrari F40's !

Cheers
Mike
1973 RHD 911T viewtopic.php?t=73984
1995 993 C4 (Gone but not forgotten)
neilbardsley
Nurse, I think I need some assistance
Posts: 8637
Joined: Mon Apr 16, 2012 4:31 pm

Re: Storage Queries

Post by neilbardsley »

Can I ask how long does an engine have to be left before all the oil film drains into the slump and you are getting some wear on startup? I know some oil/additive companies make some wild claims but 1, 24 hours, 1 week?

Could, after my Engine has been sitting for a bit, it reluctance to start until the fuel gets to the carbs be good for it because the Engine is lubricated before starting?

Sent from my Redmi 7 using Tapatalk
“A REMINDER. I would be grateful if those members who have borrowed bits from me in emergencies (e.g starter motor, oil cooler, etc) would return them and/or contact me”. – Chris Turner RIP
Nine One One
DDK 1st, 2nd and 3rd for me!
Posts: 2157
Joined: Fri Mar 01, 2013 11:45 am
Location: Kernow - good old Cornwall

Re: Storage Queries

Post by Nine One One »

Neil,
probably exactly the same when you do an oil change - pull off the HT lead to the coil, and turn the engine over until the oil pressure light goes out.

bearing in mind when the oil is hot/warm it is going to drain back to the sump fairly quickly
Post Reply