White 916 with flares BYW 693V

For all you Porsche 914 fanatics!

Moderators: drummerboytom, MdR

swapped
DDK slapper chatter
Posts: 325
Joined: Sun Jun 04, 2006 4:01 am
Location: Chester

White 916 with flares BYW 693V

Post by swapped »

The above car is the reason I have (at last) a 914 (I know, but they are pretty much the same for my purposes) - it was specifically the first one I'd ever seen, in the pages of a magazine I can't remember the title of in around 1982 (I was prime petrol-head material, at 12 years old) - which is why I'm asking here.

I thought I had found the article, titled "the forgotten porsche" in a back-issue of classic and sportscar, but having bought the back issue, it's the right car, but the wrong magazine article - the one in my memory went into more depth about the changes made to the car (it's got a bigger engine 'n' stuff), and I'm convinced it was in glossy colour, where the c&sc is colour only on the front cover, than b&w newsprint inside.

Have you got the magazine? Do you remember it? Is the car itself still around?Help me out here - I want to complete the 'loop' by having the car (my 914, I meen) AND the article that started it for me.

Carl
User avatar
Nige
Nurse, I think I need some assistance
Posts: 6688
Joined: Wed Nov 26, 2003 9:11 pm
Location: Denby, Derbyshire

Post by Nige »

the reg number isn't listed onthe RAC vehicle search, if it was age related it would put the car about 1981 vintage? They didn't make em then? only 71 and 72?
swapped
DDK slapper chatter
Posts: 325
Joined: Sun Jun 04, 2006 4:01 am
Location: Chester

Post by swapped »

Hi Nige,

I know, but mine was on a 'W' until recently, as that was the year it was imported, so I'm assuming a similar story.

My guess is that having imported the car (in whatever configuration is started life), the owner completed the rebuild / renovation and set about showing it off to as many mags as would have him - perhaps following the time-honoured c&sc tradition of publishing a feature article in the same issue as the car in question appears for sale - witness the lightweight e-type in the latest issue.

It not being on the register is less promising, though.

Carl
User avatar
Nige
Nurse, I think I need some assistance
Posts: 6688
Joined: Wed Nov 26, 2003 9:11 pm
Location: Denby, Derbyshire

Post by Nige »

I'm that bored at work I've just googled 'Porsche 916 magazine articles' there ain't much out there.

Anyhow, I best do some work.
User avatar
23e Heure
I used to have a life, then came DDK
Posts: 3879
Joined: Thu Dec 09, 2004 3:14 pm
Location: London

Post by 23e Heure »

Carl... I think maybe I can make you happy.
I believe I may have the magazine you are looking for.
5 or 6 page spread, I seem to remember - painted white, the (UK) car was delivered with white leather interior too!
But... there's always the chance that it's the same Classic & Sportscar article that you already have...
I will check at home at the weekend and then scan it for you.
Last edited by 23e Heure on Fri Jul 28, 2006 11:04 am, edited 1 time in total.
James
'20 718 GT4
'87 R4 GTL Clan
'74 914/6 3.0 Texas GT (Sold)
'73 911 2.7 RS Replica LHD (Sold)
'72 911 2.4 E RHD (Sold)
User avatar
Nige
Nurse, I think I need some assistance
Posts: 6688
Joined: Wed Nov 26, 2003 9:11 pm
Location: Denby, Derbyshire

Post by Nige »

Dude, sounds good but its Swapped who's after the article
swapped
DDK slapper chatter
Posts: 325
Joined: Sun Jun 04, 2006 4:01 am
Location: Chester

Post by swapped »

23e Heure wrote:Nige... I think you're gonna be happy.
Don't give it to Nige - It's me who wants it! :lol:

If you can do the scan for me though, I will love you forever. :love7:

Carl
User avatar
23e Heure
I used to have a life, then came DDK
Posts: 3879
Joined: Thu Dec 09, 2004 3:14 pm
Location: London

Post by 23e Heure »

Hey swapped... you must've been still on the forum, and read my post before I saw that I should edit it - may well be the article you already have.
Fingers crossed for you, but it's a rare article about a rarer car, so I'll scan and post for the 916 fans whatever the outcome.
Last edited by 23e Heure on Fri Jul 28, 2006 11:19 am, edited 1 time in total.
James
'20 718 GT4
'87 R4 GTL Clan
'74 914/6 3.0 Texas GT (Sold)
'73 911 2.7 RS Replica LHD (Sold)
'72 911 2.4 E RHD (Sold)
swapped
DDK slapper chatter
Posts: 325
Joined: Sun Jun 04, 2006 4:01 am
Location: Chester

Post by swapped »

Shhh!

Don't tell anyone I'm working.

If it's got a white leather interior, it sounds like it must be the one - how many could there be?

Thank you thank you thank you.

Carl
negawsklov
DDK above all
Posts: 173
Joined: Sun Oct 23, 2005 4:11 pm
Location: Leicestershire

Post by negawsklov »

swapped wrote:...but mine was on a 'W' until recently, as that was the year it was imported...
Have you got it re-registered with an age related plate then? How easy is that to do? My '73 2.0 is on a '78S plate for the same reason :)
1973 2.0 914s
swapped
DDK slapper chatter
Posts: 325
Joined: Sun Jun 04, 2006 4:01 am
Location: Chester

Post by swapped »

I'd love to tell you exactly how to go about it, but it was done by the previous owner.

He did say it was easy though - even easier for him, as he lived a short walk away from the appropriate department bulding and just walked in - for all I know, you can do the same at any post office, but i would expect to have to do it through swansea at some point (though he didn't live in swansea...).

My car is now on an 'L', which is still technically incorrect, as that makes it a 1972, which is it's model year, but not it's manufacturing date ('71).

Previous owner said he was told it was possible to get the correct year, but it needed documenting by Porsche as part of the applciation, and calling it 1972 was enough to get it tax exempt.

I would have thought it would be enough to show that the chassis number has a coded build year, but it's not my decision!

When you succeed in doing this, it could make an interesting article here.

Carl
negawsklov
DDK above all
Posts: 173
Joined: Sun Oct 23, 2005 4:11 pm
Location: Leicestershire

Post by negawsklov »

Thanks, I'm gonna look into this further :)

Ben 8)
swapped wrote:I'd love to tell you exactly how to go about it, but it was done by the previous owner.

He did say it was easy though - even easier for him, as he lived a short walk away from the appropriate department bulding and just walked in - for all I know, you can do the same at any post office, but i would expect to have to do it through swansea at some point (though he didn't live in swansea...).

My car is now on an 'L', which is still technically incorrect, as that makes it a 1972, which is it's model year, but not it's manufacturing date ('71).

Previous owner said he was told it was possible to get the correct year, but it needed documenting by Porsche as part of the applciation, and calling it 1972 was enough to get it tax exempt.

I would have thought it would be enough to show that the chassis number has a coded build year, but it's not my decision!

When you succeed in doing this, it could make an interesting article here.

Carl
1973 2.0 914s
abm914
Events Organiser
Posts: 1126
Joined: Wed Nov 12, 2003 10:17 pm
Location: Bedfordshire

Post by abm914 »

Ben

If your 14 is on an 'S' plate then you should buy the POR914S plate for it!
Has been for sale for ages so you could make of offer and get it cheap (I'd start at £500!)


http://www.newreg.co.uk/home/search/sea ... uffix.html

Ad.
abm914
Events Organiser
Posts: 1126
Joined: Wed Nov 12, 2003 10:17 pm
Location: Bedfordshire

Post by abm914 »

Think this was in a Classic & Sportscar or Classic & Thoroughbred mag. I definitely have a copy so if you pm me your email I'll scan it and send it one.

Ad.
swapped
DDK slapper chatter
Posts: 325
Joined: Sun Jun 04, 2006 4:01 am
Location: Chester

Post by swapped »

I don't want to put anyone off scanning and posting / emailing articles, but are there legal / copyright issues involved?

I want you to send me any and all article scans you have, prior to considering your legal position, but AFTER that, is a repository of scanned articles something that DDK could create, or is it too much a minefield?

While we're at it, I have found an entire set of factory workshop manuals (bless-ed be the Internet), but no sign of an owner's manual - anyone know the location of a scan of one?
Post Reply