aluminium trim

For classic Porsche 911 content

Moderators: hot66, impmad2000, Barry, Viv_Surby, Derek, Mike Usiskin

Post Reply
james911rs
DDK above all
Posts: 181
Joined: Wed Nov 12, 2003 9:43 pm
Location: Dorset

aluminium trim

Post by james911rs »

Would anybody have, or know where i could get the piece of aluminium trim that sits on the bottom lip of the rear side window. I have two of them and neither of them are good enough to go back on my car, I am after the offside one. Thanks.
User avatar
hot66
Moderator
Posts: 19264
Joined: Tue Nov 11, 2003 4:17 pm
Location: North Yorkshire

Post by hot66 »

Transend had one on ebay a while ago
James

1973 911 2.4S
1993 964 C2
2010 987 Spyder

1963 Honda C100 Supercub

Its not how fast you go, but how you go fast ;)
james911rs
DDK above all
Posts: 181
Joined: Wed Nov 12, 2003 9:43 pm
Location: Dorset

aluminium trim

Post by james911rs »

I have just bought one of Peter, but it is not as good as i had hoped, it is much better than mine, but then has a nibble out of it where it is seen with the window shut. He said it was not perfect and i took a gamble. Oh well keep looking.
jtparr
DDK 1st, 2nd and 3rd for me!
Posts: 2367
Joined: Mon May 24, 2004 10:54 pm
Location: london/surrey

aluminium trim

Post by jtparr »

hi james

I have a pair of these, as I have replaced my originals with new ones that I bought from Forest Fine. at around £100 each it was a bit steep but I thought as the cars having a full on restoration is would be worth it

there are no chunks missing just light scratches, with the most wear on the leading edge which folds over the door slam panel

I'm just about to go on vacation for a couple of weeks, if your interested I will take photos and email you when I return if you like. let me have your email address if its of interest


regards
Jonathan
Alan @ CanfordClassics
Nurse, I think I need some assistance
Posts: 4206
Joined: Fri Nov 14, 2003 3:10 pm
Location: Bournemouth
Contact:

Post by Alan @ CanfordClassics »

I am going to get some original sets, as well as door frames (for LWB cars) and door tops, re-polished and re-(bright) anodised. But this is a few weeks, maybe even a few months away.

Cheers

Alan
http://www.canfordclassics.co.uk
Porsche Restoration & Sales
Nick Moss
Nurse, I think I need some assistance
Posts: 9424
Joined: Sat Nov 08, 2003 6:59 pm
Location: East Sussex
Contact:

Post by Nick Moss »

They are available new from Porsche :shock:
Nick Moss - early911.co.uk - Fuchs refurbishment
07980 017994
nick@early911.co.uk
james911rs
DDK above all
Posts: 181
Joined: Wed Nov 12, 2003 9:43 pm
Location: Dorset

aluminium trim

Post by james911rs »

Would anyone know the part no. for both sides. Thought id try and get one from Germany but my German is not that good. Thanks
Nick Moss
Nurse, I think I need some assistance
Posts: 9424
Joined: Sat Nov 08, 2003 6:59 pm
Location: East Sussex
Contact:

Post by Nick Moss »

Left: 901.543.921.25
Right: 901.543.922.25
Nick Moss - early911.co.uk - Fuchs refurbishment
07980 017994
nick@early911.co.uk
Post Reply