Mineral Oil
Moderators: hot66, impmad2000, Barry, Viv_Surby, Derek, Mike Usiskin
-
domtoni
- DDK forever
- Posts: 704
- Joined: Sat Feb 26, 2005 2:38 pm
- Location: kinver staffs
Mineral Oil
Guys,
My car is about ready for an oil change. I have used Coma classic, semi synthetic (wrong stuff), and Castrol GTX.
Is Swepco as good (gear lub) as its reputation?
Any recommendations on brand and or experience?
Thanks
Dom
My car is about ready for an oil change. I have used Coma classic, semi synthetic (wrong stuff), and Castrol GTX.
Is Swepco as good (gear lub) as its reputation?
Any recommendations on brand and or experience?
Thanks
Dom
domtoni
1969 911E
ER Polybronze bushings, turbo tie rod ends, and 21/26mm torsion bars
1969 911E
ER Polybronze bushings, turbo tie rod ends, and 21/26mm torsion bars
- hot66
- Moderator
- Posts: 19255
- Joined: Tue Nov 11, 2003 4:17 pm
- Location: North Yorkshire
I have swepco in my box, & it deffo made a difference to the quality of teh shift, although I don't know what oil was in the box previously or how old it was either.
Engine oil ..... every year I have had a different oil in my car. I have used these fully synthetics:
Mobil1 ,
Silkolene Pro
At the moment I am running Castrol GTX.
My observations are that the car runs very slightly higher temperature with the Castrol over the other 2. I had less oil drips using the Mobil1 than the other 2 (although this is probo down to my original valve covers starting to warp slightly)
For my next oil change I think I'll be going back to Mobil1... depends how the GTX performs over the next 6 month.
Engine oil ..... every year I have had a different oil in my car. I have used these fully synthetics:
Mobil1 ,
Silkolene Pro
At the moment I am running Castrol GTX.
My observations are that the car runs very slightly higher temperature with the Castrol over the other 2. I had less oil drips using the Mobil1 than the other 2 (although this is probo down to my original valve covers starting to warp slightly)
For my next oil change I think I'll be going back to Mobil1... depends how the GTX performs over the next 6 month.
James
1973 911 2.4S
1993 964 C2
2010 987 Spyder
1963 Honda C100 Supercub
Its not how fast you go, but how you go fast
1973 911 2.4S
1993 964 C2
2010 987 Spyder
1963 Honda C100 Supercub
Its not how fast you go, but how you go fast
-
lacymr
- DDK Seasoned Poster
- Posts: 39
- Joined: Thu Jul 28, 2005 1:24 pm
- hot66
- Moderator
- Posts: 19255
- Joined: Tue Nov 11, 2003 4:17 pm
- Location: North Yorkshire
-
JonnyG
- DDK Fanatic
- Posts: 98
- Joined: Sat Apr 16, 2005 10:15 am
I have a 93000 mile engine, no smoke one small leak, I use Castrol Classic 20/50 and Red58304 75w 90ns gear oil, the latter being fantastic on a older box, helps old synchro, take a deep breath when you see the invoice tho but worth every penny. Demon Tweaks for the gear oil, and Castrol direct
Jonny
66 911
66 911
-
domtoni
- DDK forever
- Posts: 704
- Joined: Sat Feb 26, 2005 2:38 pm
- Location: kinver staffs
- Nige
- Nurse, I think I need some assistance
- Posts: 6688
- Joined: Wed Nov 26, 2003 9:11 pm
- Location: Denby, Derbyshire
My car's favourite tipple at the moment is Millers Classic Sport 20w50
http://www.millersoils.net/index2.html
http://www.millersoils.net/index2.html
- hot66
- Moderator
- Posts: 19255
- Joined: Tue Nov 11, 2003 4:17 pm
- Location: North Yorkshire
I used Valvoline in my 67. I can get it pretty cheap from my local tool shop.domtoni wrote:At days end, I bought 10 liters of Valvoline 20/50 racing oil from Chris Flavel of Stourbridge Motorsports. Gearbox oil was replaced last year and that is Mobil.
Thanks
Mike (210bhp) uses Valvoline in his 2.7RS & indicated he was very happy with it. I believe Neil Bainbridge recommended the stuff. I am now thinking of using it in my 2.4S at the next oil change
James
1973 911 2.4S
1993 964 C2
2010 987 Spyder
1963 Honda C100 Supercub
Its not how fast you go, but how you go fast
1973 911 2.4S
1993 964 C2
2010 987 Spyder
1963 Honda C100 Supercub
Its not how fast you go, but how you go fast
- hot66
- Moderator
- Posts: 19255
- Joined: Tue Nov 11, 2003 4:17 pm
- Location: North Yorkshire
-
Dr_Danger
- DDK Fanatic
- Posts: 77
- Joined: Thu Jun 29, 2006 2:57 pm
- Location: Bedfordshire
I haven't changed oil on my 911 yet. But I used to own a Tatra 603 with a aircooled V8 at the back, until very recently. I had great results from any modern semi-synthetic multi purpose oils which are suitable for both diesel and petrol cars. They are formulated to withstand higher teperatures in diesel engines and dramaticaly reduced my overall engine teperature. Even on hot days in traffic it would never get much above 3/4 on the teperature gauge and Tatras are known to run hot, being on the line with red zone is considered normal.

