Mineral Oil

For classic Porsche 911 content

Moderators: hot66, impmad2000, Barry, Viv_Surby, Derek, Mike Usiskin

domtoni
DDK forever
Posts: 704
Joined: Sat Feb 26, 2005 2:38 pm
Location: kinver staffs

Mineral Oil

Post by domtoni »

Guys,

My car is about ready for an oil change. I have used Coma classic, semi synthetic (wrong stuff), and Castrol GTX.

Is Swepco as good (gear lub) as its reputation?

Any recommendations on brand and or experience?


Thanks
Dom
domtoni
1969 911E
ER Polybronze bushings, turbo tie rod ends, and 21/26mm torsion bars
User avatar
hot66
Moderator
Posts: 19252
Joined: Tue Nov 11, 2003 4:17 pm
Location: North Yorkshire

Post by hot66 »

I have swepco in my box, & it deffo made a difference to the quality of teh shift, although I don't know what oil was in the box previously or how old it was either.

Engine oil ..... every year I have had a different oil in my car. I have used these fully synthetics:

Mobil1 ,
Silkolene Pro

At the moment I am running Castrol GTX.

My observations are that the car runs very slightly higher temperature with the Castrol over the other 2. I had less oil drips using the Mobil1 than the other 2 (although this is probo down to my original valve covers starting to warp slightly)

For my next oil change I think I'll be going back to Mobil1... depends how the GTX performs over the next 6 month.
James

1973 911 2.4S
1993 964 C2
2010 987 Spyder

1963 Honda C100 Supercub

Its not how fast you go, but how you go fast ;)
domtoni
DDK forever
Posts: 704
Joined: Sat Feb 26, 2005 2:38 pm
Location: kinver staffs

Post by domtoni »

Thanks for the input.

Dom
domtoni
1969 911E
ER Polybronze bushings, turbo tie rod ends, and 21/26mm torsion bars
lacymr
DDK Seasoned Poster
Posts: 39
Joined: Thu Jul 28, 2005 1:24 pm

Post by lacymr »

Been using mobil 1 (0-40) for the past 6 years and its fine, though you will find leaks if the engine is not tight. Also put swepco in last year as I`ve got an LSD, a pain to put in (warm it up) was using castrol before hand.

Michael
domtoni
DDK forever
Posts: 704
Joined: Sat Feb 26, 2005 2:38 pm
Location: kinver staffs

Post by domtoni »

Michael,

My motor is not real tight. I will stay with mineral oil.

Thanks
Dom
domtoni
1969 911E
ER Polybronze bushings, turbo tie rod ends, and 21/26mm torsion bars
User avatar
hot66
Moderator
Posts: 19252
Joined: Tue Nov 11, 2003 4:17 pm
Location: North Yorkshire

Post by hot66 »

when using Mobil1 etc .. I use the thicker grade 10/40 (if i have remembered the grade correctly :drunken: )
James

1973 911 2.4S
1993 964 C2
2010 987 Spyder

1963 Honda C100 Supercub

Its not how fast you go, but how you go fast ;)
JonnyG
DDK Fanatic
Posts: 98
Joined: Sat Apr 16, 2005 10:15 am

Post by JonnyG »

I have a 93000 mile engine, no smoke one small leak, I use Castrol Classic 20/50 and Red58304 75w 90ns gear oil, the latter being fantastic on a older box, helps old synchro, take a deep breath when you see the invoice tho but worth every penny. Demon Tweaks for the gear oil, and Castrol direct
Jonny

66 911
domtoni
DDK forever
Posts: 704
Joined: Sat Feb 26, 2005 2:38 pm
Location: kinver staffs

Post by domtoni »

At days end, I bought 10 liters of Valvoline 20/50 racing oil from Chris Flavel of Stourbridge Motorsports. Gearbox oil was replaced last year and that is Mobil.

Thanks
domtoni
1969 911E
ER Polybronze bushings, turbo tie rod ends, and 21/26mm torsion bars
saxon
DDK forever
Posts: 579
Joined: Tue Feb 10, 2004 4:41 pm
Location: Kelvedon North Essex

Post by saxon »

I use the same as jonny G like he says the red line is very good stuff no problems with the Castrol either . :)
2010 mini mayfair cooper s
1999 mini cooper works s




Peter
timster
DDK Newbie
Posts: 11
Joined: Thu May 19, 2005 9:49 am
Location: London

Post by timster »

Like hot66, currently running Castrol GTX 10/40 and have noticed higher running temp compared with previous '76 oil'.
'71 911E
lacymr
DDK Seasoned Poster
Posts: 39
Joined: Thu Jul 28, 2005 1:24 pm

Post by lacymr »

On mobile 1 (0-40) on a 2.4S engine oil temperature is a constant 80 degrees C even during track days.

Michael
User avatar
Nige
Nurse, I think I need some assistance
Posts: 6688
Joined: Wed Nov 26, 2003 9:11 pm
Location: Denby, Derbyshire

Post by Nige »

My car's favourite tipple at the moment is Millers Classic Sport 20w50

http://www.millersoils.net/index2.html
User avatar
hot66
Moderator
Posts: 19252
Joined: Tue Nov 11, 2003 4:17 pm
Location: North Yorkshire

Post by hot66 »

domtoni wrote:At days end, I bought 10 liters of Valvoline 20/50 racing oil from Chris Flavel of Stourbridge Motorsports. Gearbox oil was replaced last year and that is Mobil.

Thanks
I used Valvoline in my 67. I can get it pretty cheap from my local tool shop.

Mike (210bhp) uses Valvoline in his 2.7RS & indicated he was very happy with it. I believe Neil Bainbridge recommended the stuff. I am now thinking of using it in my 2.4S at the next oil change
James

1973 911 2.4S
1993 964 C2
2010 987 Spyder

1963 Honda C100 Supercub

Its not how fast you go, but how you go fast ;)
User avatar
hot66
Moderator
Posts: 19252
Joined: Tue Nov 11, 2003 4:17 pm
Location: North Yorkshire

Post by hot66 »

BTW, I only used about 350ml of castrol over the 1000 miles LeMan trip.

In 2004 I used slightly more Mobil1 on the same trip
James

1973 911 2.4S
1993 964 C2
2010 987 Spyder

1963 Honda C100 Supercub

Its not how fast you go, but how you go fast ;)
Dr_Danger
DDK Fanatic
Posts: 77
Joined: Thu Jun 29, 2006 2:57 pm
Location: Bedfordshire

Post by Dr_Danger »

I haven't changed oil on my 911 yet. But I used to own a Tatra 603 with a aircooled V8 at the back, until very recently. I had great results from any modern semi-synthetic multi purpose oils which are suitable for both diesel and petrol cars. They are formulated to withstand higher teperatures in diesel engines and dramaticaly reduced my overall engine teperature. Even on hot days in traffic it would never get much above 3/4 on the teperature gauge and Tatras are known to run hot, being on the line with red zone is considered normal.
Post Reply