Interior Questions

For classic Porsche 911 content

Moderators: hot66, impmad2000, Barry, Viv_Surby, Derek, Mike Usiskin

Post Reply
domtoni
DDK forever
Posts: 704
Joined: Sat Feb 26, 2005 2:38 pm
Location: kinver staffs

Interior Questions

Post by domtoni »

Gang,

My car has a dealer installed A/M AC system. I want to pull it out. The condensor unit releases the cold air vents by the passenger foot well.
The footwell is open to the boot.
Should a panel be over this to stop the air from entering the passenger compartment?

Carpet colour - my car came with the S package. The carpet appears gray. Is this the famous salt/pepper carpet or some other derivative?

Has anyone used those PP dash covers to hide the cracks?
What are they like?

Best
Dom
domtoni
1969 911E
ER Polybronze bushings, turbo tie rod ends, and 21/26mm torsion bars
1972_911t
DDK forever
Posts: 688
Joined: Tue Aug 16, 2005 8:21 pm
Location: Yorkshire

Post by 1972_911t »

Hi Dom

If your dealer fit air con is anything like mine was, the dealers basically just hack a hole into the front of the footwell into the smuglers box this basically just needs a panel welding in to the hole.

Steve
1972 911t RS Styled + G50 Converted
SAAB 9-3ss Aero
domtoni
DDK forever
Posts: 704
Joined: Sat Feb 26, 2005 2:38 pm
Location: kinver staffs

Post by domtoni »

Thanks. That makes it a bit more complex.

Ciao
Dom
domtoni
1969 911E
ER Polybronze bushings, turbo tie rod ends, and 21/26mm torsion bars
veryporky
DDK forever
Posts: 719
Joined: Wed May 11, 2005 5:40 pm
Location: Cambridge - ish

Post by veryporky »

I had the same hole through to my smuggler's box too. To be honest their cut out was a bit rough and ready. Just welded a plate in and added sealer around the edge just to be sure.
Keith
domtoni
DDK forever
Posts: 704
Joined: Sat Feb 26, 2005 2:38 pm
Location: kinver staffs

Post by domtoni »

Thanks Keith.

What is an Alfa Bertone 105?
I had two Alfa 75 3 liters in Germany 15 years ago.

Thanks

Dom
domtoni
1969 911E
ER Polybronze bushings, turbo tie rod ends, and 21/26mm torsion bars
Bertroex
DDK 1st, 2nd and 3rd for me!
Posts: 2051
Joined: Sat May 07, 2005 11:52 am
Location: Brewood, Staffs

Post by Bertroex »

The Alfa 105 Bertone is the GT GTA GT junior and GTV series of sixties and seventies coupe's, I believe.

The Step front is the earlier series with only two headlights instead of 4 and with 1300 and 1600 cc engines.

I'm not really an Alfa man but I did drive a 3 litre 75 and my my, a real hairy chested sportscar! Fantastic!

Bert
-1968 912 SWB Targa LHD
-1976 911 Carrera 3.o Targa RHD
-1983 944 190bhp (Augment Automotive enhanced) RHD
-1993 964 C4 Jubi RHD
-1979 280SLC manual LHD, 1989 500SL, 1997 SL500,
Ex 1976 911 2.7 Targa, 1979 911 SC, 1983 930, etc
domtoni
DDK forever
Posts: 704
Joined: Sat Feb 26, 2005 2:38 pm
Location: kinver staffs

Post by domtoni »

Bert,

The Alfa 75 was that ugly boxy sedan but I can say that it was the most powerful company car I could own (U.S. employer). Car saw 240 Km on the autobahn between Koeln and Bonn. Not very stable. On the same piece of road, I drove a 3.2 impact bumper 911 that was very stable, and forgive me all, very boring.

Best
Dom
domtoni
1969 911E
ER Polybronze bushings, turbo tie rod ends, and 21/26mm torsion bars
Post Reply