Upper Bonnet Latch (Retainer)

[knapmann]

I need the spring retainer part from the front bonnet upper latch. I understand that I probably will have to buy a whole latch to get this component though.

[Ralph]

Got this engine lid latch for £30 posted if it's anygood - not sure if the thread is the same size as on the front?

[knapmann]

Hi Ralph thanks for the offer, I had assumed that the retainer is the same on both parts but they are not, they are smaller on the engine lid so its no good to me I have updated the thread

[911hillclimber]

part shown is off my 1973 T, and came off the steel bonnet in 1993! I fitted a glass one for hillclimbing the car, this latch has been in a nice dry box for the last 31 years...

As you can see, the plunger shaft shank is the 'fat' diameter as your picture.

I'll make the conical button for you in duralumin for a £15 donation to the DDK Charity McMillan
Can make one this coming week and post it to you.
The part will be very bright, but could be 'corroded' down I'm sure.

I would use my part as the pattern and ensure it fits on the plunger shaft before sending.

Let me know when you can. No probs if no good to you.
Graham.

[knapmann]

Sounds great Graham! Win-Win! I will make the donation now!

[911hillclimber]

Ok, will machine away this week.
Please pm a delivery address when you can.
Graham.

[911hillclimber]

Ready to post, have your address.



And trial fitted:

[knapmann]

Wow that looks awesome Graham, almost too nice to use! Wish I had those skills! And the equipment!

[911hillclimber]

Glad you like it, nice bit of relaxing tinkering for 60 mins for me!

Lathe is 103 years old...be like me!!

[neilbardsley]

Very cool. I think for my one years ago a 944 fit

Sent from my 22011119UY using Tapatalk

[Jonnydaz53]

Hi Graham great post , I have the same issue would there be any chance you would be able to spin one up for me. If so let me know.

Many thanks

Jonny

[911hillclimber]

Yes, can do, no hardship.
Can't get to the lathe until this Thursday, other cars taking up a LOT of time tomorrow/Weds, I had a spare hour today.

Going rate is £15 to the DDK charity and you need to pm to me a delivery address.

Will let you know via this thread of Neil's when it is ready.

[Jonnydaz53]

I have pm you my details and sent the donation.

Thanks Again

[911hillclimber]

Your sleeve is all done and in the post tomorrow to the address sent John.

[32FlatSix]

Hi Graham, would you know what material the original part was made of? I've a similar latch which has been in a fire and this retainer part and the spring have completely disappeared, so I'd assumed it might have been nylon, like I've seen on a 914 rear bonnet latch.