Maybe the mouse wrapped the insulation around the pump as it was disturbing his sleep ...
.
What did you do in/on/for your Porsche today?
Moderators: hot66, Miggs, 58A - 71E, impmad2000, drummerboytom, Barry, Helen, Viv_Surby, Derek, KS, abm914, Mike Usiskin
-
Lightweight_911
- Nurse, I think I need some assistance
- Posts: 18010
- Joined: Wed Nov 12, 2003 10:48 pm
- Location: Worcs/W Mids border
Re: What did you do in/on/for your Porsche today?
.
Maybe the mouse wrapped the insulation around the pump as it was disturbing his sleep ...
.
Maybe the mouse wrapped the insulation around the pump as it was disturbing his sleep ...
.
Andy
“Adding power makes you faster on the straights;
- subtracting weight makes you faster everywhere”
“Adding power makes you faster on the straights;
- subtracting weight makes you faster everywhere”
-
Lightweight_911
- Nurse, I think I need some assistance
- Posts: 18010
- Joined: Wed Nov 12, 2003 10:48 pm
- Location: Worcs/W Mids border
Re: What did you do in/on/for your Porsche today?
.
- & your 2 jubilee clips don't match !
.
- & your 2 jubilee clips don't match !
.
Andy
“Adding power makes you faster on the straights;
- subtracting weight makes you faster everywhere”
“Adding power makes you faster on the straights;
- subtracting weight makes you faster everywhere”
-
911hillclimber
- Nurse, I think I need some assistance
- Posts: 20723
- Joined: Mon Mar 10, 2008 6:26 pm
- Location: West Midlands
Re: What did you do in/on/for your Porsche today?
So, there is more than 1 JT Parr on DDK! 
What did we use before tie wraps?
What did we use before tie wraps?
73T 911 Coupe, road/hillclimber 3.2L
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9
-
KS
- Nurse, I think I need some assistance
- Posts: 15778
- Joined: Fri May 07, 2004 3:12 pm
- Location: Cornwall
Re: What did you do in/on/for your Porsche today?
That's because the undertray hasn't been fitted in that photo...Cortina wrote:and you have a bolt missing ... but am sure you can see that !
Grant you (not my work) - but at least the aircraft nuts grip, unlike nylocs.Cortina wrote:... and your bolts for the master cyl are a teeny weeny bit short !
Lightweight_911 wrote:.
Maybe the mouse wrapped the insulation around the pump as it was disturbing his sleep ...
.
Lightweight_911 wrote:.
- & your 2 jubilee clips don't match !
.
Bloody hell you lot, haven't you got anything better to do thank hassle an old man?
-
Hugo 356
- DDK rules my life!
- Posts: 1132
- Joined: Fri May 10, 2013 6:02 pm
- Location: Reading
Re: What did you do in/on/for your Porsche today?
No need to feel sorry for the mouse, I also intend to be placed in my 356 in a mummified state when the time comes, preferably after a 917 led cortege Jo Siffert style
maverick
noun
1. an unorthodox or independent-minded person.
2. an unbranded calf or yearling.
Origin mid 19th century: from the name of Samuel A. Maverick (1803–70), a Texas rancher who did not brand his cattle.
https://www.instagram.com/hugo356a/
noun
1. an unorthodox or independent-minded person.
2. an unbranded calf or yearling.
Origin mid 19th century: from the name of Samuel A. Maverick (1803–70), a Texas rancher who did not brand his cattle.
https://www.instagram.com/hugo356a/
-
anglophone1
- I need to get out more!
- Posts: 3292
- Joined: Tue Mar 23, 2010 1:35 pm
- Location: West Cork,Ireland
Re: What did you do in/on/for your Porsche today?
Sent from my iPhone using Tapatalk
Clive
West Cork, Ireland
RGruppe #814
1978 SC/1984 3.2 Outlaw -Jaffa 911
1973 914 - on Webers - historic rally car- Tango 914
1977 924 2.0 on Webers street legal race car - Martini 924
1975 911/Flachbau 930 clone- too cool for school!
West Cork, Ireland
RGruppe #814
1978 SC/1984 3.2 Outlaw -Jaffa 911
1973 914 - on Webers - historic rally car- Tango 914
1977 924 2.0 on Webers street legal race car - Martini 924
1975 911/Flachbau 930 clone- too cool for school!
-
stretch
- Me and DDK sitting in a tree! KISSING
- Posts: 2922
- Joined: Thu May 21, 2009 2:54 pm
- Location: Kent
Re: What did you do in/on/for your Porsche today?
Took the ST for it's 1st service and sorted out a few niggles. Nice early morning drive.
20210408_184156 by stretch1985, on
20210408_184156 by stretch1985, on70T barn find...... to ST.
1971 - 914
1971 - 914
-
neilbardsley
- Nurse, I think I need some assistance
- Posts: 8637
- Joined: Mon Apr 16, 2012 4:31 pm
Re: What did you do in/on/for your Porsche today?
Looks good Clive. I've considered that upgrade myself.anglophone1 wrote:
Sent from my iPhone using Tapatalk
Sent from my Redmi 7 using Tapatalk
“A REMINDER. I would be grateful if those members who have borrowed bits from me in emergencies (e.g starter motor, oil cooler, etc) would return them and/or contact me”. – Chris Turner RIP
-
hot66
- Moderator
- Posts: 19268
- Joined: Tue Nov 11, 2003 4:17 pm
- Location: North Yorkshire
What did you do in/on/for your Porsche today?
Thought my seat felt less comfortable than usual ... quick inspection showed one of the steel hooks holding the webbing in place had snapped . Quick search on eBay and a few new stainless webbing hooks ordered ... they’re pretty much the same as the originals just a bit shorter in their depth ( which means the webbing will be kept tighter )
Fitting the hooks to my webbing wasn’t quite a straightforward as I’d originally thought. When my seats were trimmed, the hooks must have been located in the webbing and then sewn in as there was no way the hooks were going in through the webbings fold over... thought I’d try the more ‘bodge’ way first by unpicking the cotton thread where the hooks attach to the end to increase the size of the hole ... and it worked. New clips fitted to old webbing ( pic of the side with the original hook )
Quick reassembly with some fannying on with the little staples holding the seat leather in place over the webbing hook location points on the frame and another little job complete
Looking good
Fitting the hooks to my webbing wasn’t quite a straightforward as I’d originally thought. When my seats were trimmed, the hooks must have been located in the webbing and then sewn in as there was no way the hooks were going in through the webbings fold over... thought I’d try the more ‘bodge’ way first by unpicking the cotton thread where the hooks attach to the end to increase the size of the hole ... and it worked. New clips fitted to old webbing ( pic of the side with the original hook )
Quick reassembly with some fannying on with the little staples holding the seat leather in place over the webbing hook location points on the frame and another little job complete
Looking good
James
1973 911 2.4S
1993 964 C2
2010 987 Spyder
1963 Honda C100 Supercub
Its not how fast you go, but how you go fast
1973 911 2.4S
1993 964 C2
2010 987 Spyder
1963 Honda C100 Supercub
Its not how fast you go, but how you go fast
-
hashman
- DDK forever
- Posts: 716
- Joined: Thu Dec 11, 2003 12:46 am
- Location: Midlands
Re: What did you do in/on/for your Porsche today?
Nice job James , you made that look very neat and easy.
I bet it feels most satisfying sitting in it .
I guess your back will thank you.
Karl
I bet it feels most satisfying sitting in it .
I guess your back will thank you.
Karl
Keep the Outlaw Faith
-
Chris_911
- DDK slapper chatter
- Posts: 394
- Joined: Sun Aug 22, 2004 3:03 am
- Location: Cheltenham, UK
Re: What did you do in/on/for your Porsche today?
On the -ve side: broke my distributor
On the +ve side: fitted my refurbished alternator and fan shroud, and the new engine wiring harness.
On the +ve side: fitted my refurbished alternator and fan shroud, and the new engine wiring harness.
"Racing is Life. Anything that happens before, or after, is just waiting."
1988 3.2 Carrera Sport Coupe
2006 Honda VFR800 Vtec
1988 3.2 Carrera Sport Coupe
2006 Honda VFR800 Vtec
-
jury
- I used to have a life, then came DDK
- Posts: 3537
- Joined: Mon Apr 16, 2007 9:06 pm
- Location: Portland, Oregon, USA
Re: What did you do in/on/for your Porsche today?
Snug!
Was on the fence, but love them...However gone from a 2+2 to a 2
Body coloured shell planned...
Chris
Was on the fence, but love them...However gone from a 2+2 to a 2
Body coloured shell planned...
Chris
# 465
1967 912 Polo Red
1968 912/11 RAL 7001 ' MOD ROD '
1990 964 C2 Velvet Red
1991 VW Vanagon GL (SOLD - Vanagone)
2017 Coleman CT200U
“It’s not where you’re from, it's where you’re at”
1967 912 Polo Red
1968 912/11 RAL 7001 ' MOD ROD '
1990 964 C2 Velvet Red
1991 VW Vanagon GL (SOLD - Vanagone)
2017 Coleman CT200U
“It’s not where you’re from, it's where you’re at”
-
neilbardsley
- Nurse, I think I need some assistance
- Posts: 8637
- Joined: Mon Apr 16, 2012 4:31 pm
Re: What did you do in/on/for your Porsche today?
With KS help took the fuel level sensor out to inspect it
Nice original markings on the top
Sent from my Redmi 7 using Tapatalk
Nice original markings on the top
Sent from my Redmi 7 using Tapatalk
“A REMINDER. I would be grateful if those members who have borrowed bits from me in emergencies (e.g starter motor, oil cooler, etc) would return them and/or contact me”. – Chris Turner RIP
-
rhd racer
- Me and DDK sitting in a tree! KISSING
- Posts: 2581
- Joined: Wed Jun 23, 2004 9:47 pm
- Location: Nottinghamshire
Re: What did you do in/on/for your Porsche today?
Washed 6 months of dust and flocking material off the racer, ready for the season, then up on the lift for an oil and filter
Can you see what is wrong with this pic?
Yep, no way to undo the sump drain plug or catch the oil!
A bit of repositioning fixed it, although the result oil spill was not much fun (it holds a bit more because of the deep sump, was draining from a greater height on the lift and was warm after running the car up). Hey ho
It also smelt a little fuelly, which after 2 years and only about 200 flat out miles is not a particularly great sign...
Sent from my iPhone using Tapatalk
Can you see what is wrong with this pic?
Yep, no way to undo the sump drain plug or catch the oil!
A bit of repositioning fixed it, although the result oil spill was not much fun (it holds a bit more because of the deep sump, was draining from a greater height on the lift and was warm after running the car up). Hey ho
It also smelt a little fuelly, which after 2 years and only about 200 flat out miles is not a particularly great sign...
Sent from my iPhone using Tapatalk
93 964 C2
99 Boxster 2.5 > 3.4 hill climber
71 914/6 3.0 - gone
'You see Paul, hill climbing is like making love to a beautiful woman. You get your motor running, check your fluids, hang on tight and WHOA..30 seconds later it's all over!' Swiss Tony
99 Boxster 2.5 > 3.4 hill climber
71 914/6 3.0 - gone
'You see Paul, hill climbing is like making love to a beautiful woman. You get your motor running, check your fluids, hang on tight and WHOA..30 seconds later it's all over!' Swiss Tony
-
AndrewSlater
- I luv DDK!
- Posts: 994
- Joined: Wed Nov 30, 2011 3:35 pm
Re: What did you do in/on/for your Porsche today?
Finally took it for a test drive after my engine rebuild that started in September!
More info here https://www.ddk-online.com/phpBB2/viewt ... 16&t=67387
More info here https://www.ddk-online.com/phpBB2/viewt ... 16&t=67387
1966 Porsche 912 Slate Grey, red interior - first owner owned for 41 years
1974 Porsche 911 2.7 (The Manhattan project) viewtopic.php?f=28&t=51455
1973 VW 914 1.7 Olympic Blue - ( gone to a good home )
1974 Porsche 911 2.7 (The Manhattan project) viewtopic.php?f=28&t=51455
1973 VW 914 1.7 Olympic Blue - ( gone to a good home )