Oil filter console

Jesse · Post by **Jesse** » Fri Mar 04, 2016 4:37 pm

Can the oil filter console be fitted wrong on a -71 911T or is it (the 3 screws) offset hence only goes on one way?

Have tried looking in the workshop manual but didnt find anything on this matter..

Kind regards
Jesse

Nick Moss · Post by **Nick Moss** » Fri Mar 04, 2016 4:48 pm

Just turn it round until the 3 screws line up, i don't remember there being an offset, so it should fit 3 ways

Jesse · Post by **Jesse** » Fri Mar 04, 2016 5:12 pm

Thanks for your reply Nick!

How do I know which of the 3 ways is correct if it can be fitted all 3 ways?

Sorry if I am being unclear!

Regards

Jesse · Post by **Jesse** » Fri Mar 04, 2016 7:45 pm

Is my question understandable or is everyone else but me enjoying a pint at this hour? =)

Hugely thankful for help!

Lightweight_911 · Post by **Lightweight_911** » Fri Mar 04, 2016 7:57 pm

You need to line up the hole arrowed with the corresponding hole in the tank (usually at the bottom as seen in this picture):

DDK - Die Deutschen Klassiker

Oil filter console

Oil filter console

Re: Oil filter console

Re: Oil filter console

Re: Oil filter console

Re: Oil filter console