New member

For you flat four Porsche 912 fanatics

Moderators: Miggs, KS

Post Reply
User avatar
C3s
DDK slapper chatter
Posts: 421
Joined: Wed Nov 11, 2015 3:06 pm

New member

Post by C3s »

Hello everyone, i am a new member and have had trouble registering, all user error! There may be a previous post out there so apologies for any confusion. This is a test and if all is ok i will attempt a photo or 2 shortly. My real name is Paul, maybe it would have been a better user name? Stop typing, take pics! ImageImage




Hope that worked
User avatar
Bootsy
Site admin and the Boss
Posts: 25744
Joined: Sat Nov 08, 2003 6:09 pm
Location: Norwich
Contact:

Re: New member

Post by Bootsy »

Welcome to DDK!
1972 911T | 1994 993 Carrera | 1999 986 Boxster |

Vintage Heuer, Omega, Zenith and other vintage watches - http://www.heuerheritage.co.uk
User avatar
C3s
DDK slapper chatter
Posts: 421
Joined: Wed Nov 11, 2015 3:06 pm

Re: New member

Post by C3s »

Thank-you. I forgot to write that it's a 66 912


Hope that worked
User avatar
C3s
DDK slapper chatter
Posts: 421
Joined: Wed Nov 11, 2015 3:06 pm

Re: New member

Post by C3s »

Image pic of inside
Ian Gunney
DDK 1st, 2nd and 3rd for me!
Posts: 2326
Joined: Thu Nov 13, 2003 7:42 am
Location: Cardiff

Re: New member

Post by Ian Gunney »

welcome and good choice of Porsche.
1966 912 Karmann Coupe - polo red.
1972 914/6 GT replica - 2.7 - signal orange.
1961 Standard 217 Tractor.
2003 Boxster S.
1967 Alfa Giulia Sprint GT Veloce.

http://www.redcastleclassics.com
User avatar
C3s
DDK slapper chatter
Posts: 421
Joined: Wed Nov 11, 2015 3:06 pm

Re: New member

Post by C3s »

Thanks Ian, it took years of convincing the PO to let go. It was a complete ivory car when i took over but had been vandalised but all good now. Loads of welding done over the last 2 years and then it dawned on me that the unusually rot-free floorpans had been previously replaced with Beetle ones so very not happy but that's it with old stuff, chasing and correcting the bodges. Also need a pr of front wings as i eventually realised those fitted are LWB ones so also need lights & grilles oh and a correct rear grille and to top it all i think a pr of rear wings would be best as there are repairs, dents that were not apparent under the filler and the arches had been flared so all in all got my work cut out and about £6k to spend on just buyinh the panels. Those lovely Canadian ones look the part even though they'll hardly be seen.. Finally, Mrs. C3s wants an extension on the house! Can i hear laughing?! [EYES]
Ian Gunney
DDK 1st, 2nd and 3rd for me!
Posts: 2326
Joined: Thu Nov 13, 2003 7:42 am
Location: Cardiff

Re: New member

Post by Ian Gunney »

C3s wrote:Thanks Ian, it took years of convincing the PO to let go. It was a complete ivory car when i took over but had been vandalised but all good now. Loads of welding done over the last 2 years and then it dawned on me that the unusually rot-free floorpans had been previously replaced with Beetle ones so very not happy but that's it with old stuff, chasing and correcting the bodges. Also need a pr of front wings as i eventually realised those fitted are LWB ones so also need lights & grilles oh and a correct rear grille and to top it all i think a pr of rear wings would be best as there are repairs, dents that were not apparent under the filler and the arches had been flared so all in all got my work cut out and about £6k to spend on just buyinh the panels. Those lovely Canadian ones look the part even though they'll hardly be seen.. Finally, Mrs. C3s wants an extension on the house! Can i hear laughing?! [EYES]
I think most of us here can recognise the difficulties with competing priorities from other halves...
1966 912 Karmann Coupe - polo red.
1972 914/6 GT replica - 2.7 - signal orange.
1961 Standard 217 Tractor.
2003 Boxster S.
1967 Alfa Giulia Sprint GT Veloce.

http://www.redcastleclassics.com
User avatar
C3s
DDK slapper chatter
Posts: 421
Joined: Wed Nov 11, 2015 3:06 pm

Re: New member

Post by C3s »

Indeed, i understand completely so have switched to an easier cheaper project!
Post Reply