160 hp 2.0s engine?
Moderators: hot66, impmad2000, Barry, Viv_Surby, Derek, Mike Usiskin
-
cachik
- DDK Seasoned Poster
- Posts: 25
- Joined: Tue Mar 14, 2006 10:39 pm
160 hp 2.0s engine?
Hi have just bought mongrel 67 RHD 912 RS replica with 2.0 s engine no 960117
but it has mechanical fuel pump on the engine unused with electric pump feeding webers is this 160 hp engine should it have mechanical pump on the engine thanks
but it has mechanical fuel pump on the engine unused with electric pump feeding webers is this 160 hp engine should it have mechanical pump on the engine thanks
-
cachik
- DDK Seasoned Poster
- Posts: 25
- Joined: Tue Mar 14, 2006 10:39 pm
unleaded petrol ?bbb
Hi another question is it ok to use unleaded petrol in this engine thanks 
-
Nick Moss
- Nurse, I think I need some assistance
- Posts: 9424
- Joined: Sat Nov 08, 2003 6:59 pm
- Location: East Sussex
- Contact:
The 67S motor had the (unused) mounting for the old mechanical scavenge pump that was used on the very early 130 bhp 911 motors on the left cam chanin cover. The S motor is identified by its type number 901/02 and the engine number which in your case appears to be in the correct range. The S also had alloy barrels which you should be able to identify easily enough.
-
davidppp
- DDK rules my life!
- Posts: 1064
- Joined: Sat Jan 08, 2005 9:51 pm
Hello, there.
It seems you have a selection of parts there!
The twin mech pumps on the left can chain cover are for the Solexes..which preceded the S engines..
Thcase however seems to have probably come from a later engine.
You may also find you have centre feed cam oiling, and probably the Solex cams, which are a bit less powerful than the S cams..
I am looking for an early engine, for a resto I'm doing, so if you want to sell it I am interested.
I have a 3.6 motor which will fit if you want!.....and several gearboxes to suit..
Kind regards
David
It seems you have a selection of parts there!
The twin mech pumps on the left can chain cover are for the Solexes..which preceded the S engines..
Thcase however seems to have probably come from a later engine.
You may also find you have centre feed cam oiling, and probably the Solex cams, which are a bit less powerful than the S cams..
I am looking for an early engine, for a resto I'm doing, so if you want to sell it I am interested.
I have a 3.6 motor which will fit if you want!.....and several gearboxes to suit..
Kind regards
David
-
cachik
- DDK Seasoned Poster
- Posts: 25
- Joined: Tue Mar 14, 2006 10:39 pm
MOT time
Hi guys thanks for all the info am just getting it ready for MOT as it runs out next week needs two plates welding near rear arms just sorting some wiring lights fuel tanks has slight leak pinhole generator light staying on although it is charging time to hand it over to a mechanic to do work
Is there anything to seal tank up with ?
thanks Tina
Is there anything to seal tank up with ?
thanks Tina
-
Gilbert '71 T
- I luv DDK!
- Posts: 894
- Joined: Sun Oct 03, 2004 9:12 am
- Location: N London
Re: MOT time
A few people have had good results from this..cachik wrote:Is there anything to seal tank up with ?
thanks Tina
http://www.frost.co.uk/item_Detail.asp?productID=8223
It will require removal of the tank
Good luck
Darren
71 911T with C3 motor
71 911T with C3 motor

