Reproduction Seats
Moderators: hot66, impmad2000, Barry, Viv_Surby, Derek, Mike Usiskin
-
domtoni
- DDK forever
- Posts: 704
- Joined: Sat Feb 26, 2005 2:38 pm
- Location: kinver staffs
Reproduction Seats
Guys,
I am thinking about buying a set of sport seats. Have seen the BF Torino seats and the Vintage Seats from the USA. Anything else out there?
Best
Dom
I am thinking about buying a set of sport seats. Have seen the BF Torino seats and the Vintage Seats from the USA. Anything else out there?
Best
Dom
domtoni
1969 911E
ER Polybronze bushings, turbo tie rod ends, and 21/26mm torsion bars
1969 911E
ER Polybronze bushings, turbo tie rod ends, and 21/26mm torsion bars
-
Peter
- I luv DDK!
- Posts: 816
- Joined: Thu Nov 13, 2003 5:55 pm
- Location: Kingston upon Thames
- hot66
- Moderator
- Posts: 19239
- Joined: Tue Nov 11, 2003 4:17 pm
- Location: North Yorkshire
some fantastic replicas here :
http://www.rsl-classic.de/pages_en/welcome.html
'mike' has some of these in his RS replica

http://www.rsl-classic.de/pages_en/welcome.html
'mike' has some of these in his RS replica

James
1973 911 2.4S
1993 964 C2
2010 987 Spyder
1963 Honda C100 Supercub
Its not how fast you go, but how you go fast
1973 911 2.4S
1993 964 C2
2010 987 Spyder
1963 Honda C100 Supercub
Its not how fast you go, but how you go fast
-
revival-cars
- DDK forever
- Posts: 518
- Joined: Mon Dec 05, 2005 12:55 am
- Location: London
- Contact:
-
davidppp
- DDK rules my life!
- Posts: 1064
- Joined: Sat Jan 08, 2005 9:51 pm
-
steve wright
- DDK rules my life!
- Posts: 1036
- Joined: Mon Aug 02, 2004 12:17 pm
sit before you buy mate... i found i didn't have a lightweight recaro shaped bum
and wouldn't last more than about an hour in the chair!
'53 356 Pre-A (a box of bits!)
'54 Okrasa/Porsche/VW special
'58 356A Super (GS-spec)
'65 Razoredge Ghia
'66 Westfalia Camper
'70 911S (2.3 ST Le-Mans spec engine)
http://www.pushrod.org
http://www.classicporschemag.co.uk
'54 Okrasa/Porsche/VW special
'58 356A Super (GS-spec)
'65 Razoredge Ghia
'66 Westfalia Camper
'70 911S (2.3 ST Le-Mans spec engine)
http://www.pushrod.org
http://www.classicporschemag.co.uk
-
Dyno Soar
- I luv DDK!
- Posts: 994
- Joined: Fri Dec 19, 2003 10:16 am
- Location: London, England
Those seats are ment to be SO BLOODY uncomfortable. Mike has one in his car and he says he only got it to be correct. The other seat is a BF Torino Nurbergring.hot66 wrote:some fantastic replicas here :
http://www.rsl-classic.de/pages_en/welcome.html
'mike' has some of these in his RS replica
I run the Nurbergring buckets and have to say they are excellent seats. Although I run full FIA spec harnesses and they really plug you into the seat. Not sure if they are any good with regular belts.
Alam
77' 911 Carerra 3.0 'The Beast'
58' 356-A Coupe
55' Chevy
51' AP17
77' 911 Carerra 3.0 'The Beast'
58' 356-A Coupe
55' Chevy
51' AP17
-
2.4TE
- DDK above all
- Posts: 184
- Joined: Mon Dec 08, 2003 4:31 pm
- Location: Surrey
- hot66
- Moderator
- Posts: 19239
- Joined: Tue Nov 11, 2003 4:17 pm
- Location: North Yorkshire
most of those seats on www.deser site are the Mark Waring ones ( also available from http://www.bielstein.com/ )
http://www.bielstein.com/BF-Sitze/Sitz- ... ibung.html
http://www.bielstein.com/BF-Sitze/Sitz- ... ibung.html
James
1973 911 2.4S
1993 964 C2
2010 987 Spyder
1963 Honda C100 Supercub
Its not how fast you go, but how you go fast
1973 911 2.4S
1993 964 C2
2010 987 Spyder
1963 Honda C100 Supercub
Its not how fast you go, but how you go fast
-
11er
- DDK Newbie
- Posts: 1
- Joined: Mon May 23, 2005 11:20 am
- Bootsy
- Site admin and the Boss
- Posts: 25715
- Joined: Sat Nov 08, 2003 6:09 pm
- Location: Norwich
- Contact:
I've got Nurburgring seats in my 911 and they are very comfortable. As Dyno said with regular belts though you do slide a bit when using the car hard.
1972 911T | 1994 993 Carrera | 1999 986 Boxster |
Vintage Heuer, Omega, Zenith and other vintage watches - http://www.heuerheritage.co.uk
Vintage Heuer, Omega, Zenith and other vintage watches - http://www.heuerheritage.co.uk
-
domtoni
- DDK forever
- Posts: 704
- Joined: Sat Feb 26, 2005 2:38 pm
- Location: kinver staffs
Guys,
I studied the Deser and Bielstein sites and found the seats to be different. I think wwclassics supply only the S seat from Deser.
I have some contacts in Italy, and will ask them to check the place out. I will give you a further update.
If the seats look good, I may be interested in buying a pair of the S seats.
Best
Dom
I studied the Deser and Bielstein sites and found the seats to be different. I think wwclassics supply only the S seat from Deser.
I have some contacts in Italy, and will ask them to check the place out. I will give you a further update.
If the seats look good, I may be interested in buying a pair of the S seats.
Best
Dom
domtoni
1969 911E
ER Polybronze bushings, turbo tie rod ends, and 21/26mm torsion bars
1969 911E
ER Polybronze bushings, turbo tie rod ends, and 21/26mm torsion bars

