Track-rod ends, track control arm ... best source of supply?

Need some help with a technical problem - ask away and let's see if we can all help.

Moderators: hot66, impmad2000, Nige

Post Reply
User avatar
hot66
Moderator
Posts: 19264
Joined: Tue Nov 11, 2003 4:17 pm
Location: North Yorkshire

Track-rod ends, track control arm ... best source of supply?

Post by hot66 »

Where is the best place to buy some 'quality' track-rod ends, track control arm & steering yoke / bushes from?

:)
James

1973 911 2.4S
1993 964 C2
2010 987 Spyder

1963 Honda C100 Supercub

Its not how fast you go, but how you go fast ;)
domtoni
DDK forever
Posts: 704
Joined: Sat Feb 26, 2005 2:38 pm
Location: kinver staffs

Post by domtoni »

Hot 66,

Did you ever resolve this? I think you want to replace the ball joints and tie rods. Have you considered just going to Eurocarparts and buy all the Lemfoerder stuff they have?

Dom
domtoni
1969 911E
ER Polybronze bushings, turbo tie rod ends, and 21/26mm torsion bars
User avatar
hot66
Moderator
Posts: 19264
Joined: Tue Nov 11, 2003 4:17 pm
Location: North Yorkshire

Post by hot66 »

My initial question stemmed from the feedback from someone doing the front tracking. As it turned out, what they thought was worn, wasn't.

If & when I do replace parts I'm going with the tubo parts as recommended :)

Thanks

James
James

1973 911 2.4S
1993 964 C2
2010 987 Spyder

1963 Honda C100 Supercub

Its not how fast you go, but how you go fast ;)
Post Reply