It should go through the hole in the side shown below
Sent from my iPhone using Tapatalk
Need a gismo for a 73 911 distributor please
Moderators: hot66, Miggs, 58A - 71E, impmad2000, drummerboytom, Barry, Helen, Viv_Surby, Derek, KS, abm914, Mike Usiskin
-
jb
- Me and DDK sitting in a tree! KISSING
- Posts: 2567
- Joined: Thu Jul 13, 2006 10:34 pm
- Location: London
Need a gismo for a 73 911 distributor please
Does anyone have a spare gismo, low tension connection, for 73 911 distributor that has a spade connection on both the inside and outside of the distributor - the power for the points
It should go through the hole in the side shown below
Sent from my iPhone using Tapatalk
It should go through the hole in the side shown below
Sent from my iPhone using Tapatalk
#1370
-
jb
- Me and DDK sitting in a tree! KISSING
- Posts: 2567
- Joined: Thu Jul 13, 2006 10:34 pm
- Location: London
Re: Need a gismo for a 73 911 distributor please
It the bit circled above
For a 0 231 169 009 unit
Sent from my iPhone using Tapatalk
#1370
-
jb
- Me and DDK sitting in a tree! KISSING
- Posts: 2567
- Joined: Thu Jul 13, 2006 10:34 pm
- Location: London
Re: Need a gismo for a 73 911 distributor please
Maybe there is someone out there who fitted breakerless points and removed the insulated block?
#1370