Page 1 of 1
911T 1968 Plugs
Posted: Tue Aug 10, 2021 11:08 am
by Trevorcarr
I’ve fitted electronic ignition to my 1968 911T a few months ago. I’ve tried a couple of different plug types but the car only runs well for 500 or so miles without changing them again. Can anybody recommend what plugs I should fit or should I abandon and go back to points? Any advice appreciated!!
Re: 911T 1968 Plugs
Posted: Tue Aug 10, 2021 12:00 pm
by Lightweight_911
.
You don't say what plugs you're currently using.
I'm a big fan of NGK plugs - use them in all my cars.
For 911 engines I've always used BP7ES - with a gap of ~0.028".
One word of warning though - buy them from a reputable source as there are a lot of 'fake' NGK plugs out there.
.
Re: 911T 1968 Plugs
Posted: Tue Aug 10, 2021 12:18 pm
by Trevorcarr
Thanks Andy,those are the ones I’ve just put in so fingers crossed. Ran on Bosch’s before