Looking to adjust the valves but am reluctant to drain the engine oil as did it less than a year ago. Does anyone know roughly how much oil I'd lose taking the valve covers off ?
Cheers
Sam
valves
Moderators: hot66, impmad2000, Nige
-
911hillclimber
- Nurse, I think I need some assistance
- Posts: 20695
- Joined: Mon Mar 10, 2008 6:26 pm
- Location: West Midlands
Re: valves
Presume it is a 911 engine.
You will lose a thimble full from the lower covers when you open them up and will leak into the heat exchangers unless you are quick.
You can also get trickles of oil from the action of the oil pump as you turn the engine over to get the cylinders to roc etc.
Upper covers leak very little.
You will lose a thimble full from the lower covers when you open them up and will leak into the heat exchangers unless you are quick.
You can also get trickles of oil from the action of the oil pump as you turn the engine over to get the cylinders to roc etc.
Upper covers leak very little.
73T 911 Coupe, road/hillclimber 3.2L
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9
-
sixpipe98
- DDK Fanatic
- Posts: 99
- Joined: Wed Nov 21, 2018 10:15 pm
Re: valves
Great, thanks for the help.
Sam
Sam