914 Gearknob

Need some help with a technical problem - ask away and let's see if we can all help.

Moderators: hot66, impmad2000, Nige

Post Reply
volksrod
DDK Seasoned Poster
Posts: 28
Joined: Thu Oct 28, 2004 2:59 pm
Location: Darlington

914 Gearknob

Post by volksrod »

Is the gearknob a push on a 914. As mine has a aftermarket one fitted and looking to change.
53 Zwitter.
72 Baja.
75 914.
jwhillracer
Me and DDK sitting in a tree! KISSING
Posts: 2904
Joined: Fri Apr 18, 2008 5:58 pm
Location: Sunny Somerset, just above the water....

Re: 914 Gearknob

Post by jwhillracer »

Yes. It should have a corrugated crush cylinder inside holding it on.
JW
Life's a single timed run with no practice....
1963 Porsche 109 Junior
1970 914/6 2.4E/Webers
1970 VW Beetle project
1972 911 Hillclimber part of the family for 40 years!
2006 Hymer Merc Starline 630
2000 T4 Van LPG
2000 Golf V5 Estate GT
Lightweight_911
Nurse, I think I need some assistance
Posts: 17999
Joined: Wed Nov 12, 2003 10:48 pm
Location: Worcs/W Mids border

Re: 914 Gearknob

Post by Lightweight_911 »

.

I have this original one with 'patina' - yours for £25 including postage if you're interested:

https://www.ddk-online.com/phpBB2/viewt ... =5&t=66054

.
Andy

“Adding power makes you faster on the straights;
- subtracting weight makes you faster everywhere”
volksrod
DDK Seasoned Poster
Posts: 28
Joined: Thu Oct 28, 2004 2:59 pm
Location: Darlington

Re: 914 Gearknob

Post by volksrod »

I have a gearknob thanks, but looking last night I thought the gear lever had had the thread cut off.
53 Zwitter.
72 Baja.
75 914.
Post Reply