Starting an engine after a year

Need some help with a technical problem - ask away and let's see if we can all help.

Moderators: hot66, impmad2000, Nige

Post Reply
Holloway Outlaw
DDK Seasoned Poster
Posts: 38
Joined: Wed Oct 19, 2011 6:42 pm
Location: London

Starting an engine after a year

Post by Holloway Outlaw »

I've been abroad for a year so Pootle has been sat in the garage without being started once.

Are there any sensible things I should/shouldn't do before popping in the battery (brand new) and starting him up?

He's a backdated SC with 3.0 engine. Had full oil change not many miles ago but obvs that's been sitting there, as has the petrol in the tank.

Have pumped up tyres and given him a push and all wheels are moving freely.

Any advice gratefully received.
Mat K

1980 911 RHD SC Backdated to 73, aka 'Pootle'
1964 Land Rover 2A with 200Di conversion

Missing in action...
Stolen - 1968 911T LHD (with 912 body!) keep your eyes peeled
Dead - 1968 Cal-look Beetle
User avatar
MikeB
Put a fork in me, I'm done!
Posts: 1927
Joined: Thu Aug 07, 2008 11:13 pm
Location: N. Ireland

Re: Starting an engine after a year

Post by MikeB »

I would pull the plugs and turn the engine over with the starter, about 10 secs or so at a time until you get oil pressure showing on the gauge. Then refit the plugs and fire her up, use the hand throttle to run it at about 1500 rpm to keep the oil pressure up until she is warm.

The petrol might not be in the best shape, and you need to check the brakes to see if any seals have failed, but they will probably be OK
Cheers

Mike

RS Rep 3.0 on Webers
Post Reply