Does anyone have any suggestions as to an aerosol paint that ismagnesium in colour. I cant seem to find anything that looks "right".
Ideally, like the wheels on this;
Magnesium coloured paint.
Moderators: hot66, impmad2000, Nige
-
scalino65
- DDK rules my life!
- Posts: 1159
- Joined: Sun Jul 19, 2009 9:39 am
Magnesium coloured paint.
Hi
Does anyone have any suggestions as to an aerosol paint that ismagnesium in colour. I cant seem to find anything that looks "right".
Ideally, like the wheels on this;
Does anyone have any suggestions as to an aerosol paint that ismagnesium in colour. I cant seem to find anything that looks "right".
Ideally, like the wheels on this;
-
Lightweight_911
- Nurse, I think I need some assistance
- Posts: 18002
- Joined: Wed Nov 12, 2003 10:48 pm
- Location: Worcs/W Mids border
Re: Magnesium coloured paint.
Can't see the wheel colour in your picture very clearly but you could try looking at VHT manifold paints or those sold for brake calipers as they tend to be more of a matt/dull finish.
If its for wheels I'd suggest visiting your local powder coaters - when looking for a darker silver colour for the steel/alloys wheels on my 904 I found them very helpful & they had a huge range of colours available (both for powder coating & 'wet' spraying).
If its for wheels I'd suggest visiting your local powder coaters - when looking for a darker silver colour for the steel/alloys wheels on my 904 I found them very helpful & they had a huge range of colours available (both for powder coating & 'wet' spraying).
Andy
“Adding power makes you faster on the straights;
- subtracting weight makes you faster everywhere”
“Adding power makes you faster on the straights;
- subtracting weight makes you faster everywhere”
-
scalino65
- DDK rules my life!
- Posts: 1159
- Joined: Sun Jul 19, 2009 9:39 am
Re: Magnesium coloured paint.
Hi Andy
Thank you. I was looking at some VHT at frosts but they reckon it wont heat cure on wheels. (not sure baking in the oven would go down well at scalino towers)
Will check the powder coat route. RAL standard chart seems to have some close matches.
Thank you. I was looking at some VHT at frosts but they reckon it wont heat cure on wheels. (not sure baking in the oven would go down well at scalino towers)
Will check the powder coat route. RAL standard chart seems to have some close matches.