Page 1 of 1

Brake pad fitting kits ('74 911)

Posted: Fri Apr 07, 2017 1:35 pm
by AndrewSlater
For those reading my restoration thread will know that I was having problems fitting a Pagid front brake pad fitting kit to my car.

I fitted the clip but soon realised that it didn't fit very well and also it grates against the rotor when I turn the wheel.
I bought the kit from Eurocarparts but looking on the Pagid database they don't claim to do a kit for my '74 911.
Image

So I decided to buy a Delphi kit instead which now that it has arrived is similar to the Pagid one and again doesn't appear to be the right kit.

Here is a photo of the Pagid, Delphi and original clips.

Image

I notice that RosePassion sell a kit that in the photos look closer to the originals I have but at £46+ per kit it seems a tad expensive for two spring clips.

Can anyone confirm that the Delphi and Pagid clips are definitely the wrongs ones ( or am I fitting them wrong )?
Or better still anyone know of a source of known good kits for a better price?

As always any suggestions are much appreciated before I buy some more parts that don't fit!
Thanks
Andrew

Re: Brake pad fitting kits ('74 911)

Posted: Fri Apr 07, 2017 1:44 pm
by AndrewSlater
Furthermore if anyone can identify my caliper type that would be helpful to me.

Re: Brake pad fitting kits ('74 911)

Posted: Fri Apr 07, 2017 11:51 pm
by Bruce M
What is the bolt spacing of the calipers?

3" is the "M" caliper
3.5" is the "A" caliper

(The one piece aluminium "S" calliper also has 3.5" bolt spacing)

Re: Brake pad fitting kits ('74 911)

Posted: Sat Apr 08, 2017 6:44 am
by jtparr
Andrew
Why don't you give you're local Porsche centre a call

Re: Brake pad fitting kits ('74 911)

Posted: Sat Apr 08, 2017 9:48 am
by Nick Moss
It looks like you have a Pagid kit for a 3.2 which has a thicker disc hence a wider calliper

Re: Brake pad fitting kits ('74 911)

Posted: Sat Apr 08, 2017 10:20 am
by AndrewSlater
Thanks for the advice gents - both front and rear calipers have 3" bolt spacing so that looks like they are M calipers.

After plenty of online searching there are plenty of inexpensive kits that are shown as compatible but none look like the genuine Porsche /ATE ones, with the two halves riveted together.

Anyone know of any reasonably priced fitting kits that do actually fit otherwise it looks like I will have to buy the expensive kits just for piece of mind?

Thanks again for your help.

Re: Brake pad fitting kits ('74 911)

Posted: Sat Apr 08, 2017 11:09 am
by Bruce M
Part number 90135191614?

I think that's right for the "M" but maybe someone (who actually knows!) can confirm. Not very expensive from Rose & probably cheap enough from your local dealer.

Re: Brake pad fitting kits ('74 911)

Posted: Sat Apr 08, 2017 7:31 pm
by AndrewSlater
Thanks Bruce I've ordered a set of those from RosePassion. They claim they are only upto '73 but think they are the ones.
£13 a pair is better than the £50+ they want for the '74 ones!!

Re: Brake pad fitting kits ('74 911)

Posted: Tue Apr 18, 2017 9:49 am
by AndrewSlater
Just to say, the clips turned up and fit perfectly ( I'd almost forgotten what it was like to have the correct part and it fit effortlessly :roll: ).

Image

Thought I would let others know as RosePassion don't list the clips on their own when you select a '74 car, only the full kits at £50+.

So thanks again Bruce!

Re: Brake pad fitting kits ('74 911)

Posted: Tue Apr 18, 2017 10:47 am
by Bruce M
:-)