hello all, me again!
I have a rear view mirror stuck to the glass, original is a chromed swan neck affair which I want to get back too.
however the mirror I have is stuck fast, have tried soaking base in sticky stuff remover, but its not budging.
I fear breaking the glass if I force it too much, or am I being a wimp?!
any suggestions?
Thanks
Andrew
removing a rear view mirror from glass
Moderators: hot66, impmad2000, Nige
-
newto912
- DDK above all
- Posts: 157
- Joined: Sat Feb 13, 2016 10:33 am
- Location: Bournemouth
removing a rear view mirror from glass
1966 912 LHD
1980 911 SC Targa
1969 912 RHD in process of restoration
1980 911 SC Targa
1969 912 RHD in process of restoration
-
johnM
- I need to get out more!
- Posts: 3397
- Joined: Mon Apr 03, 2006 10:27 pm
- Location: Lake District
Re: removing a rear view mirror from glass
Hi
Try a hair drier, slowly warm the glass area and get it as hot as possible, should soften the glue.
(Best to be done in a relatively warm area so you don’t stress and crack the screen)
Kind Regards
Try a hair drier, slowly warm the glass area and get it as hot as possible, should soften the glue.
(Best to be done in a relatively warm area so you don’t stress and crack the screen)
Kind Regards
John
1970 2.2E Coupe.
2004 996 GT3 mkII
2015 Skoda Octavia VRS TSI DSG.
2021 Toyota GR Yaris Circuit Pack
1970 2.2E Coupe.
2004 996 GT3 mkII
2015 Skoda Octavia VRS TSI DSG.
2021 Toyota GR Yaris Circuit Pack
-
newto912
- DDK above all
- Posts: 157
- Joined: Sat Feb 13, 2016 10:33 am
- Location: Bournemouth
Re: removing a rear view mirror from glass
Thanks for the tip.
Will try it later on and report back
Will try it later on and report back
1966 912 LHD
1980 911 SC Targa
1969 912 RHD in process of restoration
1980 911 SC Targa
1969 912 RHD in process of restoration
-
smallspeed
- I used to have a life, then came DDK
- Posts: 3856
- Joined: Mon Mar 31, 2008 12:38 pm
- Location: leicester
- Contact:
Re: removing a rear view mirror from glass
If you can get under it try cutting through the adhesive with dental floss..
-
newto912
- DDK above all
- Posts: 157
- Joined: Sat Feb 13, 2016 10:33 am
- Location: Bournemouth
Re: removing a rear view mirror from glass
Thanks chaps.
worked with a combination of heat, acetone, and instead of floss which kept breaking a very thin and sharp salmon cutting knife
onto the next problem!
worked with a combination of heat, acetone, and instead of floss which kept breaking a very thin and sharp salmon cutting knife
onto the next problem!
1966 912 LHD
1980 911 SC Targa
1969 912 RHD in process of restoration
1980 911 SC Targa
1969 912 RHD in process of restoration

