Hi All
just had my car back from paint and want to remove the doors , the fit/gaps are pretty good so I dont want to take them off by the star bolts.
How easy /difficult is it to remove the pins that pas through the hinges?
looks like you might need a special tool?
any tips
Thanks
removing doors
Moderators: hot66, impmad2000, Nige
-
newto912
- DDK above all
- Posts: 157
- Joined: Sat Feb 13, 2016 10:33 am
- Location: Bournemouth
removing doors
1966 912 LHD
1980 911 SC Targa
1969 912 RHD in process of restoration
1980 911 SC Targa
1969 912 RHD in process of restoration
-
Alan @ CanfordClassics
- Nurse, I think I need some assistance
- Posts: 4206
- Joined: Fri Nov 14, 2003 3:10 pm
- Location: Bournemouth
- Contact:
Re: removing doors
You will need the correct tools do this properly. But you are in Bournemouth which is close to me so if you want to borrow mine you are welcome to use it and the proper slide hammer.
Alan
Alan
http://www.canfordclassics.co.uk
Porsche Restoration & Sales
Porsche Restoration & Sales
-
newto912
- DDK above all
- Posts: 157
- Joined: Sat Feb 13, 2016 10:33 am
- Location: Bournemouth
Re: removing doors
Thanks Alan
that is very kind of you
Will PM you
Andrew
that is very kind of you
Will PM you
Andrew
1966 912 LHD
1980 911 SC Targa
1969 912 RHD in process of restoration
1980 911 SC Targa
1969 912 RHD in process of restoration
-
HenrikL
- DDK Newbie
- Posts: 13
- Joined: Thu Mar 17, 2016 7:57 pm
Re: removing doors
Is there a tool for this? Do you have a picture?Alan @ CanfordClassics wrote:You will need the correct tools do this properly. But you are in Bournemouth which is close to me so if you want to borrow mine you are welcome to use it and the proper slide hammer.
Alan
I made my own tool, but it would be nice to see what a proper one looks like.