Page 1 of 1

Trim sealant/adhesive

Posted: Tue Nov 22, 2016 8:01 pm
by Dean.s
When I stripped the car for it's restore the a & b pillar chrome trims were stuck on with a black non hardening sealant adhesive.

I've done a few searches but nothing seems to match what was on there. All I find is stuff that goes hard or is engine sealant in tiny tubes.

When others have refitted this trim what did you use?

Re: Trim sealant/adhesive

Posted: Tue Nov 22, 2016 8:06 pm
by Gary71
It's normally Dum Dum, but I don't think you can buy that anymore. Try non setting body caulking

Re: Trim sealant/adhesive

Posted: Tue Nov 22, 2016 8:25 pm
by Mr Pharmacist

Re: Trim sealant/adhesive

Posted: Wed Nov 23, 2016 8:20 pm
by Dean.s
Thanks both, have sent off a couple of enquiries for more info.

Re: Trim sealant/adhesive

Posted: Wed Nov 23, 2016 10:03 pm
by Ashley James
It might be Tiger Seal, which is very effective.

Re: Trim sealant/adhesive

Posted: Sun Dec 11, 2016 1:03 am
by 914Chap
Hi, the stuff that Porsche actually used, and is still available is Terostat ribon sealing tape. It is available from Type 911 at about £30 ish.

http://type911shop.co.uk/epages/de867ca ... ducts/7723

Cheers Jonathan.