
Hella 128 identification needed
Moderators: hot66, impmad2000, Nige
-
redrobin911
- Put a fork in me, I'm done!
- Posts: 1594
- Joined: Tue Aug 24, 2010 11:56 pm
- Location: Northern Ireland
Hella 128 identification needed
HI - I bought these years ago on ebay and stored them in my garage and took them out today to look at fitting to a SWB 911. I've noticed that these 128's seem upside down i.e. the "hood" part of the housing is to the bottom if hung correctly on a 911, I can also see the drain hole so I can only assume these are designed to be mounted the opposite way i.e. standing up rather than hanging down. Needless to say these were advertised as 911 fitting and IMO not. Can anyone shed any light (excuse pun!!) on what I've got here and if I'm simply missing something - BTW i've tried turning the front face 180 degs but wont fit as the lights are not symetrical. If anyone knows what they'll fit I'll probably relist then back on ebay. thx in advance.


65 911 FIA race car
66 911 RHD restoration
67 911S LHD
74 911 Carrera 2.7 US Spec
79 Aistream Excella 28 MH
97 Bimota Vdue
14 KTM 690R Duke
83 RD350 YPVS
08 Ducati M900
00 Ducati 996SPS
944 T, 3.2 RSR, GT3 - SOLD
66 911 RHD restoration
67 911S LHD
74 911 Carrera 2.7 US Spec
79 Aistream Excella 28 MH
97 Bimota Vdue
14 KTM 690R Duke
83 RD350 YPVS
08 Ducati M900
00 Ducati 996SPS
944 T, 3.2 RSR, GT3 - SOLD
-
SeanP
- I luv DDK!
- Posts: 869
- Joined: Thu Sep 06, 2012 11:59 pm
- Location: North West Essex
Re: Hella 128 identification needed
Merc fitment if the drain holes are where you state, although you should be able to flip the lens, rim and even the reflectors over if required.
I have one for on mine.
Edit Just reread you post. Cannot remember if mine have the hoods like yours, but I can definitely mount my rims up either way.
Sean
I have one for on mine.
Edit Just reread you post. Cannot remember if mine have the hoods like yours, but I can definitely mount my rims up either way.
Sean
1966 912
1969 912/6 hotish rod in build
1974 914 Dead
LI 125 Lambretta (Yeah right it’s a 125)
Mini Cooper s
1969 912/6 hotish rod in build
1974 914 Dead
LI 125 Lambretta (Yeah right it’s a 125)
Mini Cooper s
-
redrobin911
- Put a fork in me, I'm done!
- Posts: 1594
- Joined: Tue Aug 24, 2010 11:56 pm
- Location: Northern Ireland
Re: Hella 128 identification needed
HI Sean - thx for this, nope I tried flipping but they're not symetrica and wont flip....pain the backside. Does anyone knowwhat model of Merc and I get these listed and sold?SeanP wrote:Merc fitment if the drain holes are where you state, although you should be able to flip the lens, rim and even the reflectors over if required.
I have one for on mine.
Edit Just reread you post. Cannot remember if mine have the hoods like yours, but I can definitely mount my rims up either way.
Sean
65 911 FIA race car
66 911 RHD restoration
67 911S LHD
74 911 Carrera 2.7 US Spec
79 Aistream Excella 28 MH
97 Bimota Vdue
14 KTM 690R Duke
83 RD350 YPVS
08 Ducati M900
00 Ducati 996SPS
944 T, 3.2 RSR, GT3 - SOLD
66 911 RHD restoration
67 911S LHD
74 911 Carrera 2.7 US Spec
79 Aistream Excella 28 MH
97 Bimota Vdue
14 KTM 690R Duke
83 RD350 YPVS
08 Ducati M900
00 Ducati 996SPS
944 T, 3.2 RSR, GT3 - SOLD
-
Lightweight_911
- Nurse, I think I need some assistance
- Posts: 18002
- Joined: Wed Nov 12, 2003 10:48 pm
- Location: Worcs/W Mids border
Re: Hella 128 identification needed
I don't think they're 128's - can you measure the width ??
128's are 145mm wide - those could be the narrower (~ 123 mm) lamps ...
128's are 145mm wide - those could be the narrower (~ 123 mm) lamps ...
Andy
“Adding power makes you faster on the straights;
- subtracting weight makes you faster everywhere”
“Adding power makes you faster on the straights;
- subtracting weight makes you faster everywhere”
-
redrobin911
- Put a fork in me, I'm done!
- Posts: 1594
- Joined: Tue Aug 24, 2010 11:56 pm
- Location: Northern Ireland
Re: Hella 128 identification needed
HI Andy - I measure them as 146mm x 99mmLightweight_911 wrote:I don't think they're 128's - can you measure the width ??
128's are 145mm wide - those could be the narrower (~ 123 mm) lamps ...
65 911 FIA race car
66 911 RHD restoration
67 911S LHD
74 911 Carrera 2.7 US Spec
79 Aistream Excella 28 MH
97 Bimota Vdue
14 KTM 690R Duke
83 RD350 YPVS
08 Ducati M900
00 Ducati 996SPS
944 T, 3.2 RSR, GT3 - SOLD
66 911 RHD restoration
67 911S LHD
74 911 Carrera 2.7 US Spec
79 Aistream Excella 28 MH
97 Bimota Vdue
14 KTM 690R Duke
83 RD350 YPVS
08 Ducati M900
00 Ducati 996SPS
944 T, 3.2 RSR, GT3 - SOLD
-
Ian Gunney
- DDK 1st, 2nd and 3rd for me!
- Posts: 2326
- Joined: Thu Nov 13, 2003 7:42 am
- Location: Cardiff
Re: Hella 128 identification needed
They look like 127s to me but is difficult to tell from the pic.
128s you can take the glass / reflector section out and turn 180 degrees.
the Hella's that fit 190SLs / 300SL's are larger.
Ian
128s you can take the glass / reflector section out and turn 180 degrees.
the Hella's that fit 190SLs / 300SL's are larger.
Ian
1966 912 Karmann Coupe - polo red.
1972 914/6 GT replica - 2.7 - signal orange.
1961 Standard 217 Tractor.
2003 Boxster S.
1967 Alfa Giulia Sprint GT Veloce.
http://www.redcastleclassics.com
1972 914/6 GT replica - 2.7 - signal orange.
1961 Standard 217 Tractor.
2003 Boxster S.
1967 Alfa Giulia Sprint GT Veloce.
http://www.redcastleclassics.com
-
redrobin911
- Put a fork in me, I'm done!
- Posts: 1594
- Joined: Tue Aug 24, 2010 11:56 pm
- Location: Northern Ireland
Re: Hella 128 identification needed
Had a quick google for the Hella 127's and they're the same as mine - any idea what the most popular fit was - for what car??
65 911 FIA race car
66 911 RHD restoration
67 911S LHD
74 911 Carrera 2.7 US Spec
79 Aistream Excella 28 MH
97 Bimota Vdue
14 KTM 690R Duke
83 RD350 YPVS
08 Ducati M900
00 Ducati 996SPS
944 T, 3.2 RSR, GT3 - SOLD
66 911 RHD restoration
67 911S LHD
74 911 Carrera 2.7 US Spec
79 Aistream Excella 28 MH
97 Bimota Vdue
14 KTM 690R Duke
83 RD350 YPVS
08 Ducati M900
00 Ducati 996SPS
944 T, 3.2 RSR, GT3 - SOLD
-
Ian Gunney
- DDK 1st, 2nd and 3rd for me!
- Posts: 2326
- Joined: Thu Nov 13, 2003 7:42 am
- Location: Cardiff
Re: Hella 128 identification needed
The parts book I have doesn't state what these originally fitted but I guess VW's would be a reasonable assumption.
Ian
Ian
1966 912 Karmann Coupe - polo red.
1972 914/6 GT replica - 2.7 - signal orange.
1961 Standard 217 Tractor.
2003 Boxster S.
1967 Alfa Giulia Sprint GT Veloce.
http://www.redcastleclassics.com
1972 914/6 GT replica - 2.7 - signal orange.
1961 Standard 217 Tractor.
2003 Boxster S.
1967 Alfa Giulia Sprint GT Veloce.
http://www.redcastleclassics.com

