Hi Guys
I'm in the process of refurbishing my handbrake/ heater/throttle levers and now have to decide on the paint finish.
The current finish looks like a black thick Dulux gloss but under that it appears to be a satin finish.
I'm thinking the original might have been gloss but could do with your advice.
Cheers
Duncan
Handbrake Lever Refurb. 73 Targa.
Moderators: hot66, impmad2000, Barry, Viv_Surby, Derek, Mike Usiskin
Handbrake Lever Refurb. 73 Targa.
1973 911E Targa RHD Viper Green
1975 914 1.8L Laguna Blue
Macan GTS Carmine Red
1975 914 1.8L Laguna Blue
Macan GTS Carmine Red
-
- DDK addict
- Posts: 132
- Joined: Wed Jun 11, 2014 6:02 pm
Re: Handbrake Lever Refurb. 73 Targa.
Hi Duncan,
I've just refurbed the handbrakes on my 912 and 911. On both I've used Simoniz tough black gloss aerosol. I find this gives a really good gloss finish. If you want to have a satin finish there is also a Simoniz tough black satin.
I use these on the smaller parts where it's not worth using the spray gun.
Cheers Stefan.
_________________
1969 LHD. 912
1970 RHD. 911e (Long term restoration project)
1967 Alfa GT Junior
I've just refurbed the handbrakes on my 912 and 911. On both I've used Simoniz tough black gloss aerosol. I find this gives a really good gloss finish. If you want to have a satin finish there is also a Simoniz tough black satin.
I use these on the smaller parts where it's not worth using the spray gun.
Cheers Stefan.
_________________
1969 LHD. 912
1970 RHD. 911e (Long term restoration project)
1967 Alfa GT Junior
-
- Nurse, I think I need some assistance
- Posts: 9424
- Joined: Sat Nov 08, 2003 6:59 pm
- Location: East Sussex
- Contact:
Re: Handbrake Lever Refurb. 73 Targa.
Satin black powder coat.
-
- DDK Seasoned Poster
- Posts: 47
- Joined: Thu Feb 18, 2010 2:21 pm
- Location: Atlanta, GA USA
Re: Handbrake Lever Refurb. 73 Targa.
How do you get the hand grip off before powder coat?Nick Moss wrote:Satin black powder coat.
Mark Erbesfield
1968 912 #12820385
1968 912 #12820385
Re: Handbrake Lever Refurb. 73 Targa.
If you heat it slightly (air gun) it will pull off, (after you unscrew the press button trigger) bugger it and replacements are avb.
What Nick says, powder coat satin black but mask off the switch contact before it goes
What Nick says, powder coat satin black but mask off the switch contact before it goes
-
- DDK Seasoned Poster
- Posts: 30
- Joined: Wed Jun 25, 2014 5:48 pm
- Location: Blackheath, London, UK
- Contact:
Re: Handbrake Lever Refurb. 73 Targa.
Thanks for this, I was about to cut the old grip off!