Page 1 of 5
RHD 914
Posted: Mon Jan 10, 2011 11:16 am
by moriarty
Purely as matter of interest, how many RHD 914's are there on here? I know of 2 others (IAN's Crayford and Wayne's racer) any more?
Moriarty
Posted: Mon Jan 10, 2011 4:36 pm
by zoomiewoz
I know of one being built

Posted: Mon Jan 10, 2011 4:56 pm
by Grindon
I sold silver one with a GT bodykit a couple of years ago, that required a complete (and I mean complete

) resto.
If my memory serves me right it went to a chap near Leicester somewhere, along with a super solid shell and spare new floor pans to assist with the rebuild. It was too far gone for my limited skills and certainly too uneconomical to pay to have it restored, but it seemed to be within the capabilities of the fella that bought it. He seemed very 'handy' having restored a few cars in his time.
I wonder what happened to it?
Cheers,
Kevin
Posted: Mon Jan 10, 2011 5:38 pm
by jwhillracer
I know where this one's hiding! Built by Autofarm in the late 70's (I saw it in Amersham when it was just finished................)
As raced at Castle Combe in 1981
Cheers!
JW
Posted: Tue Jan 11, 2011 6:06 am
by 914-6
Isn't that one now red, JW ?
Thought about selling mine (believed by some to be the first Crayford--it is 1969) recently to help fund the new workshop build, but just cant bring myself to actually do it!!
Posted: Tue Jan 11, 2011 10:41 am
by jwhillracer
914-6 wrote:Isn't that one now red, JW ?
Yes, that's the one! A rather dull and dusty red.............
JW
Posted: Tue Jan 11, 2011 11:07 am
by zoomiewoz
I have a photo of it in gunmetal gray at the 1000k race at Silverstone in the paddoc of one of the porsche teams Some time in the eightes and it looked spot on at the time . Was told it had a new bulkhead made for the conversion when i used to get all my parts off Chris Raynor in Oxon ( is he still around? ) Woz
Posted: Thu Jan 13, 2011 9:52 am
by rhd racer
zoomiewoz wrote:Was told it had a new bulkhead made for the conversion Woz
It would need one - there is no way to accomodate the pedals unless you change or heavily modify the bulkhead (hence the need to modify or relocate the fuel tank - it follows the contours of the original LHD chassis) This conversion also has the added benefit of lots of legroom for passengers!
Happy to show you round mine if it helps with the build - based in the Midlands. Should get the car back from storage in a month or so after extension finished.
W
RHD 914
Posted: Thu Jan 13, 2011 11:01 am
by moriarty
You can actually modify the the existing bulkhead but will need the services of a good panel beater if you are not into fabricating/welding yourself, i was fortunate to find such a man and we worked together on it and am glad to say it's been a worthwhile exercise. As wayne says you have to also modify the petrol tank which reduces the capacity by about a gallon, i then used the rhd pedal box from an early 911. Unfortunately thats not where it ends, theres the dash/steeringcolumn/electrics/handbrake etc.etc
I had a look at Ians' Crayford 914 to see how they did it which helped a lot (thanks Ian). If thats not put you off and fancy having a go, feel free to ask questions.
Maurice
Any more RHD,s out there??
Re: RHD 914
Posted: Thu Jan 13, 2011 12:01 pm
by 914 KEV
moriarty wrote:
Any more RHD,s out there??
spyder_finder recently broke one, which had also been converted to a full convertible with rag top and some strange wheel arches and other body mod's.
It did look a bit odd. Blue and at one time with yellow wheels and low panels.
Drove it many years ago at PCGB Highclere Castle event round the car park.
Posted: Thu Jan 13, 2011 1:15 pm
by abm914
There's also a black one out there somewhere - not a crayford and with the handbrake in the middle. It had a private plate on it about 6 years ago.
Ad.
Posted: Thu Jan 13, 2011 6:28 pm
by zoomiewoz
Yes its an exsiting project to be envolved with. We know our way around welding and fabrication. Been in to 914s for over 30 years now but not active for 20 or so . When i built my six there was no internet just networking the system for parts info etc. Got lots of parts from Crispin Mannors Cory-Smith and Chris Raynor etc. Its a friend of mine since school days thats on with the project who was involved with mine all those years ago. taking lots of pikkys of the job as we go along. Its going to be a nice everyday driver 2.4t six in her with stock headders etc (getting old now he needs the warmth) All i used to do when it was cold was suck a peppermint LOL. Thanks for the offer of a look round rhd racer i dont think you can beat looking at one in the metal and taking referance photos. Hope fuly we will be working on her this weekend
(weather permitting) all the best Woz

Posted: Fri Jan 14, 2011 7:15 pm
by porker914
Ian dont sell yours it was the first 14 that i actually saw and what convinced me to buy one or maybe a few!
You will only regret it!
David
Posted: Sun Jan 16, 2011 8:17 am
by carreracat
there's 2 here in singapore. one with GT wings in gulf orange & blue and one in primrose .
i believe they were both converted in NZ
Posted: Tue Jan 18, 2011 4:36 pm
by zoomiewoz
Has any one got a photo of the convertable spyder_finder broke iam sure i saw it for sale some were not to long ago or in the background of somethig else for sale but the listing dissapeard. would love to see it
Woz