Page 1 of 1

Ignition breaker points: are these the right ones?

Posted: Wed Sep 23, 2009 7:05 pm
by marc500
I ordered a set of points for my 356 (1960 T5). But now I have them I see they don't match what's currently in the car, here:
Image
The ones I got sent have what looks like the same spring contact part as above but the adjustable contact point is flipped round the other way... I'm assuming they are technically the right ones for the car as they seem to match the pics in my manual. Does anyone else's points in their 356 look like mine? If so, what model is your car (so I can order the right part for mine). Cheers!

Posted: Wed Sep 23, 2009 8:28 pm
by Julian Hunt
I can send you the correct ones no prob... cost approx £5
Give me a call... Julian (Karmann Konnection) 01702 601155

Posted: Thu Sep 24, 2009 10:55 pm
by Dakota
Hi
I think you may have an 009 distributor there not reallycorrect for a 356 if it is, you should set the timing for max advance at higher RPM NOT AT IDLE or you could be running retarded down the motorway which is not good , all that aside if its an 050 or 030 you should be fine.

Posted: Fri Sep 25, 2009 8:24 pm
by marc500
yep its a 009 dizzy... the guys at PRServices have been very helpful today... but I'm on the lookout for the right one if anyone has one spare...