Can anyone suggest where I can get a brake pipe for my '67 912. From the brake fluid reservoir to the master cylinder. Roger Bray don't have any in stock at the moment.
Also will it come with the appropriate fittings/clips?
Thanks,
Rose.
Where can I get a brake pipe?
Moderators: hot66, impmad2000, Nige
-
Rose
- DDK above all
- Posts: 181
- Joined: Wed Nov 19, 2003 12:38 pm
- Location: Bishop's Stortford
-
Luke
- DDK rules my life!
- Posts: 1188
- Joined: Thu Nov 13, 2003 8:37 am
- Location: London & Ringwood
Rose, do you mean a hard brake line that has a screw-in fitting on each end? I imagine you can buy them direct from Porsche with all fixings for a small fortune! I made mine up myself out of cupro-nickel pipes, it’s very easy but you do need some specialist tools. If you’re not in a hurry I can probably make you up one (would need to see your existing line though), failing that any garage worth it’s salt should be able to help you out.
Porscheless but still aircooled
-
FraserMurray
- Moderator
- Posts: 664
- Joined: Mon Nov 10, 2003 9:03 am
- Location: Berkshire
-
AirCooledExcellence
- DDK Fanatic
- Posts: 80
- Joined: Wed Feb 18, 2004 2:13 pm
- Location: Frinton-on-sea, Essex
Rose,
Like Luke says above, any garage will make them up for you, just take your old one along as a 'pattern'
Cheers,
Tim.
Like Luke says above, any garage will make them up for you, just take your old one along as a 'pattern'
Cheers,
Tim.
http://www.impactbumpers.com - Classic 911's and nothing else!
1984 911 Carrera - 3.6 Transplant
1987 911 Turbo - SOLD
1983 911 SC Targa - SOLD
1984 911 Carrera - 3.6 Transplant
1987 911 Turbo - SOLD
1983 911 SC Targa - SOLD