Page 1 of 1

Which oil

Posted: Wed May 21, 2008 11:39 pm
by Matt black70
Just wondering which oil people are using in their 911's. Does anyone have a specific favourite when comparing price vs performance.


Matt

Posted: Thu May 22, 2008 7:30 am
by hot66
~Do a search on here for oil :)

I have used nearly everything in my car :roll: :lol:

At the moment I'm using Valvoine VR1 Racing 20/50 mineral oil which I am liking, but I think next time I might drop back to a 10/40. Unless I'm really working the car hard the oil pressure stays a little bit on the high side for me ( about 1/2 bar higher than I would expect ) which I think has contributed to a new oil leak on my cam boxes :roll: . BUT it does seem very stable temp & pressure wise when I'm thrashing the car along :)

My favorite so far has been Mobil1 10/40 ( if thats the correct grade ?? )

I have used Silkolene ProR 15/50 and might move back to that next oil change.

Everyone has their own opinion on oil ;)

oil

Posted: Thu May 22, 2008 10:38 am
by richkaz
Oil have to have a think about that, but Ive been told for most 'normal' driving its sensible to use 20 -50 mineral oil. Halfords call it Classic motor oil and sell it for about £ 15 for 5 litres. An early 911 needs about 9 litres. Synthetic or semi synthetic might leak a bit.
The handbook just says use premium grade HD oil.
Richard

Posted: Thu May 22, 2008 10:41 am
by hot66
you need more than 9 Lts if you have a front oil cooler. I initially put 10 ltrs into mine then add more as required ( usually an extra 1.5 depending on how much stayed in the lines when it was drained)

Posted: Thu May 22, 2008 12:19 pm
by IanMcLeod
Always used Castrol RS 10W-60 in my 2.4. Great smell too when hot.

Ian.

Posted: Thu May 22, 2008 12:55 pm
by ashrolfe
I use Castrol RS 10W-60 as well.. It's now called Castrol 'Edge Sport' though I think.

Posted: Thu May 22, 2008 2:27 pm
by Matt black70
Once again thanks for the advice. My oil pressure at the moment is very good so It was interesting what you had to say about leaks James.

Thanks
Matt

Posted: Thu May 22, 2008 3:04 pm
by hot66
I think the oil leak was going to happen anyway :roll:

But just for info with the 20/50 .. when my temp is normal 3500 rpm = 4 bar , 4000rpm = 4.5 bar


When I'm working the car hard & the temp lifts then 3500 rpm = 3.5 bar , 4000rpm = 4 bar ..... which is how I like it.

Previous 'lighter' oils have given the above 'high temp' pressure readings at normal temps & then the pressure ( if I remember correctly ) has dropped a little as the temp has risen

Posted: Thu May 22, 2008 4:03 pm
by jwhillracer
HD SAE30 oil, just as per the handbook. Still nothing to beat it on early air-cooled engines!

Posted: Thu May 22, 2008 8:45 pm
by 74rsman
Comma Semi Synth 10w40 -

Posted: Fri May 23, 2008 9:17 pm
by domtoni
Matt,

I have used the Classic from Coma, and it worked fine. Now the car has Valvoline Racing 10 - 40 and it works fine.

Keep to mineral oil.

Best
Dom