Page 1 of 1
gear shif rod bush wanted plus advice
Posted: Wed Mar 19, 2008 9:16 pm
by owen nw
has any one have the bush that goes on the shift rod below the gear stick , it keeps the rod from slapping around , mine fell apart on my first drive , and how does it go on to the shift rod , thanks all advice welcome owen nw
Posted: Thu Mar 20, 2008 8:59 am
by louis356
Just pops on and you can get them anywhere. check all the bushes while you are at it. the rear universal one causes most problems.
when I investigated the 'sloppyness' on my 356 it had no bushes at all just metal to metal.
Good luck - relatively easy job if a bit fiddly.
Posted: Thu Mar 20, 2008 11:17 am
by 912uk
easy job I even made a tool for the job see some of the Porsche workshop manuals.
Also do the one at the rear as it's just as worn.
This if it has not been done before will transform the gear change use good graphite grease to lube it all up and you should get a nice job out of it all..
Good luck
post up any questions..
Posted: Thu Mar 20, 2008 5:49 pm
by owen nw
have you a contact number for someone who sells them please thanks owen nw
Posted: Thu Mar 20, 2008 5:53 pm
by 912uk
Roger Bray, Karmann Connection two to get you started..
Posted: Thu Mar 20, 2008 6:10 pm
by owen nw
cheers for that owen nw
Gever Laeve Bushes
Posted: Fri Mar 21, 2008 2:48 pm
by Mike Smith
Don`t forget PR Services
Mike
thanks
Posted: Fri Mar 21, 2008 9:35 pm
by owen nw
where are they , i ve ordered the bush from kharmann connection but would like to give as my people as possible a chance for some trade thanks owen nw
356 Parts - Servicing and Advice
Posted: Sat Mar 22, 2008 11:33 am
by Mike Smith
PR can be found at
WWW.prs356.com