gear shif rod bush wanted plus advice

owen nw · Post by **owen nw** » Wed Mar 19, 2008 9:16 pm

has any one have the bush that goes on the shift rod below the gear stick , it keeps the rod from slapping around , mine fell apart on my first drive , and how does it go on to the shift rod , thanks all advice welcome owen nw

louis356 · Post by **louis356** » Thu Mar 20, 2008 8:59 am

Just pops on and you can get them anywhere. check all the bushes while you are at it. the rear universal one causes most problems.

when I investigated the 'sloppyness' on my 356 it had no bushes at all just metal to metal.

Good luck - relatively easy job if a bit fiddly.

912uk · Post by **912uk** » Thu Mar 20, 2008 11:17 am

easy job I even made a tool for the job see some of the Porsche workshop manuals.

Also do the one at the rear as it's just as worn.

This if it has not been done before will transform the gear change use good graphite grease to lube it all up and you should get a nice job out of it all..

Good luck

post up any questions..

owen nw · Post by **owen nw** » Thu Mar 20, 2008 5:49 pm

have you a contact number for someone who sells them please thanks owen nw

912uk · Post by **912uk** » Thu Mar 20, 2008 5:53 pm

Roger Bray, Karmann Connection two to get you started..

owen nw · Post by **owen nw** » Thu Mar 20, 2008 6:10 pm

cheers for that owen nw

Mike Smith · Post by **Mike Smith** » Fri Mar 21, 2008 2:48 pm

Don`t forget PR Services

Mike

owen nw · Post by **owen nw** » Fri Mar 21, 2008 9:35 pm

where are they , i ve ordered the bush from kharmann connection but would like to give as my people as possible a chance for some trade thanks owen nw

Mike Smith · Post by **Mike Smith** » Sat Mar 22, 2008 11:33 am

PR can be found at

WWW.prs356.com

DDK - Die Deutschen Klassiker

gear shif rod bush wanted plus advice

gear shif rod bush wanted plus advice

Gever Laeve Bushes

thanks

356 Parts - Servicing and Advice