Rear Quarter window trims for 912

hunter · Post by **hunter** » Tue Feb 19, 2008 2:08 pm

The bits that sit under the window - must be non dented

Alan @ CanfordClassics · Tue Feb 19, 2008 7:48 pm

Hi Darran,

In case it helps the 67 ones are different than the 68 onward trims. Yours are chromed brass and held in from the inside of the wing rather than the later ones are screwed in.

I may have a spare pair but they are fully re-furbed and rechromed hence not cheap.

Thanks

Alan

hunter · Post by **hunter** » Wed Feb 20, 2008 1:53 am

Hi Alan

My car is a 68 model year as the trims are held in by screws just underneath the window and they appear to made of light alloy.