Any thoughts on this 1973 T Lux (UK RHD)?SOLD
-
ross.mcw
- DDK slapper chatter
- Posts: 303
- Joined: Mon Sep 17, 2007 12:10 pm
- Location: Cheshire, UK
Any thoughts on this 1973 T Lux (UK RHD)?SOLD
Hi,
Could anyone offer a 911 newbie any thoughts on this one?
http://www.pistonheads.com/sales/219421.htm
Seems a little overpriced to me although if it is all completely original I guess I may be wrong about that. Odd that it's got GRP wings though - is that common?
Also, can anyone fill me in on the differences between a T and a T Lux?
Any advice much appreciated.
Cheers, Ross.
Could anyone offer a 911 newbie any thoughts on this one?
http://www.pistonheads.com/sales/219421.htm
Seems a little overpriced to me although if it is all completely original I guess I may be wrong about that. Odd that it's got GRP wings though - is that common?
Also, can anyone fill me in on the differences between a T and a T Lux?
Any advice much appreciated.
Cheers, Ross.
- Nige
- Nurse, I think I need some assistance
- Posts: 6688
- Joined: Wed Nov 26, 2003 9:11 pm
- Location: Denby, Derbyshire
-
Gary71
- Nurse, I think I need some assistance
- Posts: 10744
- Joined: Wed Mar 31, 2004 1:27 pm
- Location: Cheshire
- Contact:
Hi, it does seem a bit expensive, but it's impossible to tell from pictures and descriptions.
GRP wings are a bit odd, not uncommon as such, but it's normally done simply to save money as the original wings are so expensive.
Having said that normally by the time you have reworked the GRP wings to fit properly and have a good surface finish you may as well have paid the money for the steel ones
The 'lux' probably refers to the 'S' trim pack. It will have the full set of gauges, sill trims, etc. It also has the S front spoiler, so it may also have the 'S' front and rear anti roll bars. Essentially you end up with an 'S' in all but engine and brakes.
Looks a reasonable car, but as always a full inpsection is the way forward!
GRP wings are a bit odd, not uncommon as such, but it's normally done simply to save money as the original wings are so expensive.
Having said that normally by the time you have reworked the GRP wings to fit properly and have a good surface finish you may as well have paid the money for the steel ones
The 'lux' probably refers to the 'S' trim pack. It will have the full set of gauges, sill trims, etc. It also has the S front spoiler, so it may also have the 'S' front and rear anti roll bars. Essentially you end up with an 'S' in all but engine and brakes.
Looks a reasonable car, but as always a full inpsection is the way forward!
-
Nick Moss
- Nurse, I think I need some assistance
- Posts: 9424
- Joined: Sat Nov 08, 2003 6:59 pm
- Location: East Sussex
- Contact:
Got to be worth a look, as at that price it is cheap if as described. The colour should probably be Light Ivory, headrests are missing (?), seal around engine bay shouldn't be there, sill trims missing, which is good as you can will be able to inspect the sills properly. Just make sure that you get someone like peter Morgan to inspect it for you. And take the Recaros for the extra £1500!
-
ross.mcw
- DDK slapper chatter
- Posts: 303
- Joined: Mon Sep 17, 2007 12:10 pm
- Location: Cheshire, UK
Thanks for the feedback guys - much appreciated. As it seems to be in Manchester from time to time, I'll go and take a look.
How do I get in touch with Peter Morgan? (I've got his book on order btw assuming it's the same person).
Any idea how much a good inspection would cost?
....actually, don't worry, found Peter's site on Google.
Cheers, Ross.
How do I get in touch with Peter Morgan? (I've got his book on order btw assuming it's the same person).
Any idea how much a good inspection would cost?
....actually, don't worry, found Peter's site on Google.
Cheers, Ross.
-
Patrice
- DDK Fanatic
- Posts: 60
- Joined: Wed Jun 06, 2007 1:34 pm
- Location: Oxfordshire
Hi Ross,ross.mcw wrote:Thanks for the feedback guys - much appreciated. As it seems to be in Manchester from time to time, I'll go and take a look.
How do I get in touch with Peter Morgan? (I've got his book on order btw assuming it's the same person).
Any idea how much a good inspection would cost?
....actually, don't worry, found Peter's site on Google.
Cheers, Ross.
I had my targa inspected by Peter Morgan last month, and it is worth it, will cost you around 350.00 Pounds.
Patrice
1969 911 2.0 T Targa
1968 912 now sold
1968 912 now sold
- bjmullan
- I need to get out more!
- Posts: 3105
- Joined: Fri Apr 30, 2004 2:15 pm
- richkaz
- DDK rules my life!
- Posts: 1292
- Joined: Mon Mar 12, 2007 9:47 pm
- Location: southampton
Dont understand why people think its overpriced when many are saying a proper RHD 911S is undervalued at 60K and is essentially a more powerful version of the same car. The only other correct RHD examples of a 911 that Ive seen recently under £20K look a bit tired or have strange paint jobs. I personally think white and ivory suit the car well and the Recarros finish it off nicely. To think you could own this AND a series 1 and a half E - type Jaguar roadster for £ 60K makes makes me think the price could be very reasonable and certainly worth a second look. 
“Much of the social history of the Western world over the past three
decades has involved replacing what worked with what sounded good "..
1971 911 2.2T sold
1970 911 2.2S Sold but remains within DDK
1959 Lancia Flaminia PF Coupe
decades has involved replacing what worked with what sounded good "..
1971 911 2.2T sold
1970 911 2.2S Sold but remains within DDK
1959 Lancia Flaminia PF Coupe
-
Barry
- Nurse, I think I need some assistance
- Posts: 4321
- Joined: Tue Aug 24, 2004 8:50 pm
- Location: East Sussex
On the face of it, I would be in the 'not over-priced' camp.
I rather suspect though, that when you see the body work it may be a bit ripply. I'm looking at the way the N/S sill flows into the door, and the profile of the bonnet front.
As it's fresh paint, I'd take a magnet, or ask to see photo's of the work at each stage. It would be an easy colour to whack some outer sills on, and do a quick cover-up job on.
Nevertheless, if it checks out with an expert (like Peter), it would have to be a fair price then (IMHO).
I rather suspect though, that when you see the body work it may be a bit ripply. I'm looking at the way the N/S sill flows into the door, and the profile of the bonnet front.
As it's fresh paint, I'd take a magnet, or ask to see photo's of the work at each stage. It would be an easy colour to whack some outer sills on, and do a quick cover-up job on.
Nevertheless, if it checks out with an expert (like Peter), it would have to be a fair price then (IMHO).
DDK Member1243 07741 273865. Home of the RY Austin 7 Trophy's and Austin Single Seat Racers
-
ross.mcw
- DDK slapper chatter
- Posts: 303
- Joined: Mon Sep 17, 2007 12:10 pm
- Location: Cheshire, UK
Will try and see it this weekend and then see about getting an inspection.
Current owner's only had it 6 months and originally bought it to build an RS Replica, but decided it was too original to do that (now has one on its way over from the US at the moment). So although it was in a messy state with very little history it's had a lot of work to bring it to its current state (which is when they discovered the GRP wings).
No headrests on the seats but has blanking plugs - sounds like they've gone missing at some point I guess.
Sounds like the heat exchangers and brake disks will need replacing in the next couple of years - I'm guessing that's not going to be as cheap as it sounds...
Cheers, Ross.
Current owner's only had it 6 months and originally bought it to build an RS Replica, but decided it was too original to do that (now has one on its way over from the US at the moment). So although it was in a messy state with very little history it's had a lot of work to bring it to its current state (which is when they discovered the GRP wings).
No headrests on the seats but has blanking plugs - sounds like they've gone missing at some point I guess.
Sounds like the heat exchangers and brake disks will need replacing in the next couple of years - I'm guessing that's not going to be as cheap as it sounds...
Cheers, Ross.
- hot66
- Moderator
- Posts: 19263
- Joined: Tue Nov 11, 2003 4:17 pm
- Location: North Yorkshire
headrests are upto £150 or so for a pair.
Personally I don't think its overpriced if it is a genuine RHD UK car & there is evidence to show the bodywork has been done to an extremely high standard and not 'bodged', although at that price I would expect the correct S sill trim to be included in teh deal, or price negotiated to suit.
Make sure you check all the panel gaps , especially around the doors.
It will all come down to what the actual quality of the resto is as different people have different ideas on what is quality
On the face of it it looks a nice car
Personally I don't think its overpriced if it is a genuine RHD UK car & there is evidence to show the bodywork has been done to an extremely high standard and not 'bodged', although at that price I would expect the correct S sill trim to be included in teh deal, or price negotiated to suit.
Make sure you check all the panel gaps , especially around the doors.
It will all come down to what the actual quality of the resto is as different people have different ideas on what is quality
On the face of it it looks a nice car
James
1973 911 2.4S
1993 964 C2
2010 987 Spyder
1963 Honda C100 Supercub
Its not how fast you go, but how you go fast
1973 911 2.4S
1993 964 C2
2010 987 Spyder
1963 Honda C100 Supercub
Its not how fast you go, but how you go fast
-
911Smonster
- DDK addict
- Posts: 106
- Joined: Mon Aug 13, 2007 12:58 pm
- Location: Silverstone
Hard to say on the price without knowing more about the history and current condition. It would have to be very good to justify.
It may never have had headrests in the first place. My 2.4S was ordered without headrests. The Recaros have blanking plugs like yours. I keep thinking of getting a pair for safety, but haven't got round to it yet.
It may never have had headrests in the first place. My 2.4S was ordered without headrests. The Recaros have blanking plugs like yours. I keep thinking of getting a pair for safety, but haven't got round to it yet.
'73 911 2.4S (gone!)

