jacking points ..wayne dempsey or josh sadler who is correct

For classic Porsche 911 content

Moderators: hot66, impmad2000, Barry, Viv_Surby, Derek, Mike Usiskin

Post Reply
Steve T
DDK addict
Posts: 119
Joined: Sun Jul 23, 2006 10:25 pm
Location: Walsall, West Midlands

jacking points ..wayne dempsey or josh sadler who is correct

Post by Steve T »

can any one clarify this ?
the first book i bought after buying 911 was wayne dempseys 101 projects which clearly says its okay to jack the rear up from under the sump lifting the car via the engine but ive just bought 911 and porsche world as it has a lengthy article on pre 73 but josh sadler of auto farm is quoted as saying it is incorrect to jack up from under the engine and can be a cause of oil leaks from the crankcases

??? any one got a view either way
rgds
Steve T
.........................................
johnM
I need to get out more!
Posts: 3397
Joined: Mon Apr 03, 2006 10:27 pm
Location: Lake District

Jacking point

Post by johnM »

My engine man is porsche trained and worked at Autofarm and Tuthils and he always jacks up the car from the sump plate.
John
1970 2.2E Coupe.
2004 996 GT3 mkII
2015 Skoda Octavia VRS TSI DSG.
2021 Toyota GR Yaris Circuit Pack
johndglynn
DDK forever
Posts: 652
Joined: Wed May 19, 2004 8:44 pm
Location: Northants
Contact:

Post by johndglynn »

I sometimes jack the join between engine and box with a block of wood between jack and motor, but I prefer to use the arb mounts at the back and the suspension mounts at the front. There is a huge amount of opinion out there on jacking.
2.4TE
DDK above all
Posts: 187
Joined: Mon Dec 08, 2003 4:31 pm
Location: Surrey

Post by 2.4TE »

Jerry Woods & Bruce Anderson = sump
Dr Dave

1972 2.4 TE
2009 V8 Vantage

#1120

Guildford
Surrey
Barry
Nurse, I think I need some assistance
Posts: 4321
Joined: Tue Aug 24, 2004 8:50 pm
Location: East Sussex

Post by Barry »

I'm with John: it's around there that the engine/box balances nicely for removal. I think the box is the important bit though, just to take any spot loads out.

Even so, I never like jacking the rear of a 911 up, and am always a bit happier when it has made it safely onto the axle stands (torsion bar covers).
DDK Member1243 07741 273865. Home of the RY Austin 7 Trophy's and Austin Single Seat Racers
IanMcLeod
DDK rules my life!
Posts: 1345
Joined: Fri Jan 14, 2005 8:33 pm
Location: Cornwall

Post by IanMcLeod »

In theory it can cause the two halves of the crankcase to move ever so slightly causing a leak to start but I know lots of mechanics who do it and I have also when required.

Ian.
davidppp
DDK rules my life!
Posts: 1064
Joined: Sat Jan 08, 2005 9:51 pm

Post by davidppp »

Hello all.

I do it , and have never seen even a pukka Porsche mechanic who did not do it.

I like to catch the join between engine and box.

Kind regards
David
Post Reply