fitting SuperPro Polyurethane Suspension Bushes

jtparr · Post by **jtparr** » Sun Aug 06, 2006 10:13 pm

hi all

having just had a box of lovely shiny zinc plated bits returned I am now beginning to fit the set of SuperPro Polyurethane Suspension Bushes I bought from Nick

is there a special or just plain neat way of inserting the ones in the front strut mounts and the engine supports, the neck of ther bush is far wider than the hole and so far just conpressing in a vice is no good

sorry if this has been answered before, but am I missing something ?

thanks

Jonathan

Nick Moss · Post by **Nick Moss** » Mon Aug 07, 2006 8:07 am

I use a hydraulic press

jtparr · Post by **jtparr** » Mon Aug 07, 2006 5:32 pm

nick is it basicaly its just a metter of enough pressure and they pop into place ?
do you have to lubricate them at all before pushing into place

thanks
jonathan

Nick Moss · Post by **Nick Moss** » Mon Aug 07, 2006 6:07 pm

Use plenty of lube