Re: 912 '67 Spring Project
Posted: Sat Aug 18, 2012 2:50 pm
Looks fantastic, great work 
DDK - Die Deutschen Klassiker
The 'Maverick' Classic Porsche Forum and Classic Porsche Club for Porsche 356, Aircooled Porsche 911, Porsche 912, Porsche 914 & Porsche Replicas. 'We join for the cars but stay for the people'
https://www.ddk-online.com/phpBB2/
912 '67 Spring Project
Page 3 of 3
Re: 912 '67 Spring Project
Posted: Sat Aug 18, 2012 2:54 pm
Damn, I wish you people would all slow down a bit!
Re: 912 '67 Spring Project
Posted: Thu Aug 23, 2012 9:08 am
tried to call you a couple of times ref sellling the 912
Re: 912 '67 Spring Project
Posted: Fri Jun 14, 2013 4:21 pm
Following a long winter no progress had been made on the 912 for months... until last weekend..
Determined to get it finished before the summer ands (or starts) I have started assembling the bumpers, lights and re-installed the new petrol tank. Also slowed up after trying two different sets of over rider bumper to body seals which neither fit correctly or look right.
The next stage is to get it started for a moral boost. The 912 was running nicely before the paintwork last year was started so uncertain why it won't fire currently. Lack of willing helpers recently has meant I can't determine if it is spark issue or something else accidently disconnected whilst masking up the engine bay. Also need an extra pair of hands to get the bonnet re-attached.
Also wondering the best option for the front number plate bracket. The previous plate was screwed on directly so don't want to go down that route again.
Will put up photo's of progress soon
Cheers
Determined to get it finished before the summer ands (or starts) I have started assembling the bumpers, lights and re-installed the new petrol tank. Also slowed up after trying two different sets of over rider bumper to body seals which neither fit correctly or look right.
The next stage is to get it started for a moral boost. The 912 was running nicely before the paintwork last year was started so uncertain why it won't fire currently. Lack of willing helpers recently has meant I can't determine if it is spark issue or something else accidently disconnected whilst masking up the engine bay. Also need an extra pair of hands to get the bonnet re-attached.
Also wondering the best option for the front number plate bracket. The previous plate was screwed on directly so don't want to go down that route again.
Will put up photo's of progress soon
Cheers
Re: 912 '67 Spring Project
Posted: Sat Jun 15, 2013 9:40 pm
Re: 912 '67 Spring Project
Posted: Wed Dec 18, 2013 11:24 am
will be up for sale once all complete. Call me on xxxxxx if interested and want to make an offer?
Re: 912 '67 Spring Project
Posted: Wed Dec 18, 2013 8:12 pm
jacko-76
I suggest posting in the Vehicles for Sale board with a link to this, although I think forum rules require a price.
Regards
Graeme
I suggest posting in the Vehicles for Sale board with a link to this, although I think forum rules require a price.
Regards
Graeme
Re: 912 '67 Spring Project
Posted: Sat Jan 04, 2014 7:26 pm
Aiming to get MOT for Easter? Big push to get finished so started with putting the glass back in with new rubber & trim.... 
Re: 912 '67 Spring Project
Posted: Mon Jan 13, 2014 5:44 pm
Windscreen now in
And also got the experts to re-install the rear windscreen as we could not get it sitting correctly. Money well spent...
Next step to fit the bonnet and rear pop out windows
And also got the experts to re-install the rear windscreen as we could not get it sitting correctly. Money well spent...
Next step to fit the bonnet and rear pop out windows
Re: 912 '67 Spring Project
Posted: Thu Jan 16, 2014 11:07 pm
Finally water tight with rear quarter windows installed.
... Next job re-attach bonnet, rear lights and then good wash to remove layers of dust on the paint work
... Next job re-attach bonnet, rear lights and then good wash to remove layers of dust on the paint work
Re: 912 '67 Spring Project
Posted: Sun Feb 16, 2014 10:19 pm
Perfect day to wash the winter dust off...
