Page 2 of 2
Posted: Fri Jun 09, 2006 11:51 am
by kevster
im running 195 50 16s - there doesnt seem to be much of a prob with clearance on front - i can run the rears on the front as well (205 50 16s)
Posted: Fri Jun 09, 2006 4:48 pm
by shelltoes
Ah, i did not notice they were 16"s.
But your tyre is 23.7" diameter, which is good, as i plan on running
165/50-15's which are more than 2" smaller and of course 3cm narrower.
You said you had to take it up from the lowest setting? Where was it catching please?
Posted: Fri Jun 09, 2006 4:53 pm
by shelltoes
obviously i'm hoping i can run mine low...
Posted: Sun Jun 11, 2006 1:34 pm
by kevster
reason i took it up wasnt clearance really - more to do with not having any suspension!! I dont really have much now - i think its running on the bump stops so i may trim them down but take it up a touch more.
lowered spindles (as fourteener said) would be the best way but they would have to be made as i dont think you can buy them.