Page 2 of 2
Posted: Mon Apr 24, 2006 1:32 pm
by Gilbert '71 T
Tom here's some pictures of mine...
And the body of the fan motor straps onto this in your picture
Hope this helps
BTW Nige, your engine bay is looking GREAT
Posted: Mon Apr 24, 2006 1:35 pm
by Gilbert '71 T
Also I know that my 'Y' is on the wrong way around
it's been like it since Barry kindly pointed it out to me last August at Brands, I just keep forgetting to switch it around
Posted: Mon Apr 24, 2006 2:04 pm
by tomgoodwin3
Problem solved!
Nice one.
Posted: Mon Apr 24, 2006 3:47 pm
by middlefour1
tomgoodwin3 wrote:
Doesn't quite look the same as the one in the diagram:
Whats happened to the other pipe??
Any thoughts?
Cheers,
Tom, the answer is in the picture....The one on ebay is part no. 914 572 011 10 which is for model years 73-76, the one for the earlier cars, 70-72 with the two outlets is 473 261 193 (VW part No. from the 411) Hope that helps.
Posted: Mon Apr 24, 2006 4:04 pm
by tomgoodwin3
Blimey, your eyesights good!!.......
Posted: Mon Apr 24, 2006 4:42 pm
by rally914
hi Tom the bottom diagram is the same for my 1972 914 part 7 fits onto the engine front lhs and fan assy bolts to it cold air enters from the front and go out left and right hope this helps rob
Posted: Mon Apr 24, 2006 6:25 pm
by middlefour1
Posted: Mon Apr 24, 2006 7:10 pm
by roger
Tom
I think I've got a blower in the garage - if its any use its yours. Are you going to Stanford Hall - if so, Ill bring it with me.
Regards
Roger
Posted: Mon Apr 24, 2006 10:08 pm
by drummerboytom
roger wrote:Tom
I think I've got a blower in the garage - if its any use its yours. Are you going to Stanford Hall - if so, Ill bring it with me.
Regards
Roger
I don't think you have
Not unless you had two at some stage !
Posted: Tue Apr 25, 2006 9:34 am
by tomgoodwin3
Thanks for the offer Roger, looks like I'm gonna get this one off ebay though....well, i've bid for it at least!
Yep, I'm going to Stanford, see you there.
Cheers,
Posted: Tue Apr 25, 2006 1:17 pm
by roger
roger wrote:
Tom
I think I've got a blower in the garage - if its any use its yours. Are you going to Stanford Hall - if so, Ill bring it with me.
Regards
Roger
Drummerboytom replied
I don't think you have
Not unless you had two at some stage !
Oops - a touch of senility creeping in there!
Posted: Wed Apr 26, 2006 1:47 am
by kevster
this topic has shed lots of light on my setup - ive got the later blower with one outlet but the Y is missing so that will probably explain why im getting fumes in from the exposed LH heat exchanger (all my hoses underneath are tightly fitted and clamped and heat exchangers in good nick).
Gilbert - looks like your Y piece is non-std? I may try and fix something up rather than hunt down an original Y piece. Least then i should be able to stop the fumes and have an even better heater - just in time for summer
ah so thats where the switch is...
