Steel wheels - SOLD

Ralph · Post by **Ralph** » Sat Dec 30, 2006 8:08 pm

Clearing out the shed and now have 4 steel wheels 15x5.1/2" for sale.

The 2 silver wheels are part no 911 361 022 11 and are ET42
The 2 red wheels are part no 944 362 041 00 and are ET53

Anyone want them for £80 ?

Four · Post by **Four** » Sat Dec 30, 2006 9:00 pm

Ron,

I've sent you a PM.

Doug

Ralph · Post by **Ralph** » Sat Dec 30, 2006 9:08 pm

Doug, will call you tomorrow.

hunter · Post by **hunter** » Sun Dec 31, 2006 4:05 pm

Hi Ron

Sent you pm

Darran

Ralph · Post by **Ralph** » Mon Jan 01, 2007 5:22 pm

Darran,

No PM received ?

louis356 · Post by **louis356** » Tue Jan 02, 2007 10:51 am

what does the ET numbers mean?

I assume that 2 are 911 wheels and 2 are 944 wheels are both sets the same?

Lightweight_911 · Post by **Lightweight_911** » Tue Jan 02, 2007 10:58 am

ET is the offset of the wheel - see the image below for explanation:

Ralph · Post by **Ralph** » Wed Jan 03, 2007 11:44 am

Thanks Andy, the above picture is worth saving for reference when looking for suitable wheels.

Us Europeans work mainly with ET, but the Americans work mainly with backspace.

louis356 · Post by **louis356** » Thu Jan 04, 2007 2:09 pm

What offest should I be looking at for my 912?

I've got some steel wheels (5.5) but just to make sure that they fit.

1980's vintage if I recall (will have to have a look - but where?)

Ralph · Post by **Ralph** » Thu Jan 04, 2007 9:18 pm

Louis,

I think that you should be looking for the ET42 911 wheels.

The ET should be stamped into the wheel, on the ones I have just sold it was stamped into the face between the wheel nuts.

pantswagen · Post by **pantswagen** » Mon Jan 08, 2007 10:20 pm

the 911 and 944 use a similar but different front ub
-in fact i know they do, althought they use the same disc
-the 911 hub is farther out board
-the 944 farteher in board

spindles maybe similar

ie a 944 steel space saver may rub a 911/2 front arch

louis356 · Post by **louis356** » Tue Jan 09, 2007 1:43 pm

Ihave 53 marked on mine

Darn, does that mean they are too big?

louis356 · Post by **louis356** » Tue Jan 09, 2007 1:45 pm

Or would they be OK for the back and I get some 42 for the front?

THEN i JUST HAVE TO FIND 2

elliot · Post by **elliot** » Tue Jan 09, 2007 8:35 pm

I may be able to help, I've got 2 or 3 of these wheels in my garage roof space that I was getting ready to ebay. They are 5.5 x 15 not sure of the ET though, I'll check tomorrow if you're interested.

Brian.

louis356 · Post by **louis356** » Wed Jan 10, 2007 9:08 am

Yes please!

DDK - Die Deutschen Klassiker

Steel wheels - SOLD

Steel wheels - SOLD

i think