Body sealer

wizzman · Post by **wizzman** » Fri Nov 17, 2006 6:55 pm

Hello all,

Could anyone help me and advise on the best product to use for the inside surface of the front luggage compartment ? It's called spray sealer and I believe a special applicator gun is required for the 3m. I'm half sure that somebody recommended a Wurth variety.

Any product part numbers would be appreciated

Thanks

Wizzman

1972_911t · Post by **1972_911t** » Fri Nov 17, 2006 11:19 pm

The wurth gun and sealer is NLA in the UK, the 3m product is a very close alternative.

See this thread http://www.ddk-online.com/phpBB2/viewto ... sc&start=0

Steve

1972_911t · Post by **1972_911t** » Fri Nov 17, 2006 11:21 pm

If you are only doing a small area and dont want to buy a bulk load of sealer to get the gun free I have an almost new one I may be willing to sell. There 160 + vat new but if you buy a few cases of sealer you get one free.

Steve

2.4TE · Post by **2.4TE** » Sat Nov 18, 2006 10:42 am

Just checked my receipt from Wurth for my purchase of the gun etc in Jan 2004:

Wurth Tel. 08705 987841

Grey sprayable sealant 310 mls no. 0893228 (£7.00)

Air Applicator gun no. 18916280 (£105.51)

Prices exclude VAT.

You can really get through the cannisters of sealant, even for a small job!

HTH

Alan @ CanfordClassics · Sun Nov 19, 2006 1:50 pm

I will be doing this job in the next few days and will get some pics.

Alan

wizzman · Post by **wizzman** » Mon Nov 20, 2006 3:57 pm

Alan.UK wrote:I will be doing this job in the next few days and will get some pics.

Alan

Look forward to seeing the pics Alan and thanks for the response

Ian

wizzman · Post by **wizzman** » Mon Nov 20, 2006 4:05 pm

1972_911t wrote:If you are only doing a small area and dont want to buy a bulk load of sealer to get the gun free I have an almost new one I may be willing to sell. There 160 + vat new but if you buy a few cases of sealer you get one free.

Seve

Thanks Steve , Is the gun a 3 m or wurth item and what will you take for it at this financially difficult time of year ?

Remember , Christmas is a time for giving !!!

Cheers. Ian

wizzman · Post by **wizzman** » Mon Nov 20, 2006 4:09 pm

2.4TE wrote:Just checked my receipt from Wurth for my purchase of the gun etc in Jan 2004:

Wurth Tel. 08705 987841

Grey sprayable sealant 310 mls no. 0893228 (£7.00)

Air Applicator gun no. 18916280 (£105.51)

Prices exclude VAT.

You can really get through the cannisters of sealant, even for a small job!

HTH

Mot helpfull , Thanks for the response

Ian

1972_911t · Post by **1972_911t** » Wed Nov 22, 2006 9:29 am

I would want £80 for the gun. It was new about 4 weeks ago and has only been used to do my fuel tank as the body shop is doing the rest of the sealing. Its the 3m gun which im told is identical to the wurth gun which is NLA.

Steve

wizzman · Post by **wizzman** » Thu Nov 23, 2006 2:09 pm

1972_911t wrote:I would want £80 for the gun. It was new about 4 weeks ago and has only been used to do my fuel tank as the body shop is doing the rest of the sealing. Its the 3m gun which im told is identical to the wurth gun which is NLA.

Steve

Sounds good to me,Steve, do you want to give me a call and give me your details and I'll send you the dosh sharpish.Will send my number and address on a pm

Thanks

Ian

Alan @ CanfordClassics · Thu Nov 23, 2006 3:40 pm

Hi,

Most of the spray sealer is now done. Fuel tank, all inner wings, front tank support and outter slam panel, inside the trunk around the tank support and the engine bay.

Will have used 17-19 tubes.

Alan

After a few test I got the texture very original looking

Thanks

Alan

PS. Thanks Nick for borrowing the wurth gun