911 S cam by andial

Alan @ CanfordClassics · Thu Sep 14, 2006 5:58 pm

Hi,

I have a pair of S cams in my car which were done by Andial. They have done just 3500 miles. I am changing them in the search to find some more HP out of my motor, I want to get a little closer to the 300 mark.

Anyway, my S cams will be coming out soon so I want to check if there is any interest on here first. These will fit in all the early cars, but if you wanted to run MFI you would need to add a rear pulley.

I am looking for £300 for them.

Thanks

Alan

steve wright · Post by **steve wright** » Fri Sep 15, 2006 8:55 am

Alan,

have you already chosen a cam? The RSR sprint cam from EBS racing is virtually identical to the '73 2.8 RSR cam apparently, which is what i put in Banshee. idles beautifully, pulls well from low and just gets up and boogies from 5 to 8.5

Alan @ CanfordClassics · Fri Sep 15, 2006 11:17 am

Hi Steve,

Thanks for the advice. I am talking with John (camgrinder) in the US and he has the dyno sheet for my motor and so we are trying to match the best cam for it. The S cams tail off to quickly on this motor and thus loose some HP which is waiting to be used

I will let you know what we decide.

Cheers

Alan

steve wright · Post by **steve wright** » Fri Sep 15, 2006 12:41 pm

please do - i'd be interested as much from an intellectual perspective as any. have a (sad) fascination with this side of our hobby

Ian Donkin · Post by **Ian Donkin** » Fri Sep 15, 2006 1:54 pm

John's done the cams for my project too

.

Alan @ CanfordClassics · Wed Sep 20, 2006 7:03 am

gilbert911 · Post by **gilbert911** » Wed Sep 20, 2006 4:52 pm

Alan,

I'll have them for £300.
Please pm me or send e mail to c.northern@gaticdover.co.uk.

Will collect

Thanks
gilbert911

Alan @ CanfordClassics · Wed Sep 20, 2006 5:10 pm

Hi Gilbert,

I have sent you a PM. These cams will not be available until another 2
or 3 weeks.

Thanks

Alan