Mounting harnesses in a 914

[dannyboy]

Before i attack what is a mint floor pan can i possibly get some pointers first?????

I'm only interested in the 4 floor mounts for the 2 harnesses. The rears will be mounted via a rollbar. 4 point , 3"harnesses are being used.

What else is required on top of the eyelets supplied, will spreader plates need to be welded in place. where do they go and where do i but this stuff??????????.

Any advise would be appreciated

Cheers Dan

[Ian Gunney]

You can get the spreader plates from Europa spares www.europaspares.com only about a £1 or so each.