Rolling road for MFI setup

veryporky · Post by **veryporky** » Fri Jul 14, 2006 12:35 pm

Can anybody recommend a rolling road with a technician who is familiar with MFI. Not too fussy about location. Just need someone who knows what they are doing when it comes to MFI.

Many thanks

hot66 · Post by **hot66** » Fri Jul 14, 2006 1:20 pm

Dave Sunderland @ Strasse knows his MFI. I think he has just set up Mick Cliffs car. No rolling road used though

Mick Cliff · Post by **Mick Cliff** » Fri Jul 14, 2006 1:28 pm

Dave Sunderland at Strasse in Leeds is THE man.
He's the guy that used to build and maintain Jack Tordoff's Carrera's (JCT 600) in the late 60's and early 70's.
He set up the MFI on my car last year and, in about 4 hours, changed it from one that ran like sh*t to a very useful machine. I haven't had to touch the MFI since that day...

hot66 · Post by **hot66** » Fri Jul 14, 2006 1:41 pm

if you look in this months PP mag at the Strasse bit, you will see my car is famous

veryporky · Post by **veryporky** » Mon Jul 17, 2006 12:58 pm

Thanks. Frankly Dave sounds like a bit of a chap but my car would perhaps still need to be set up on a rolling road to optimise the timing as it is bumped to about 9.5:1 comp from 8.5:1 and may differ from the bone stock setting.

Mike · Post by **Mike** » Mon Jul 17, 2006 1:40 pm

Down south is Bob Watson Engineering in Oxfordshire, he is a Porsche specialist with the rolling road that Neil Bainbridge and Autofarm use. The 935 at Le Mans Classic was dyno'd there, as was my 2.7 mfi.
01869 340814