Becker Radio

tanick · Post by **tanick** » Tue Jul 04, 2006 1:13 pm

I installed a Becker Radio into my car last night. It works but is really faint. I've seen them for sale with amplifiers. Have I bought only half a radio?

Also anyone know what the pin arrangement is for the DIN socket on the back?

hot66 · Post by **hot66** » Tue Jul 04, 2006 1:25 pm

have you tried turning the knob that says 'volume' clockwise ?

tanick · Post by **tanick** » Tue Jul 04, 2006 2:08 pm

I've tried (almost) everything will ALL the knobs.

Nige · Post by **Nige** » Tue Jul 04, 2006 2:15 pm

speaker wires connected properly, polarity and all that?

Front to rear fader set right?

tanick · Post by **tanick** » Tue Jul 04, 2006 5:37 pm

fader? Its mono

Just wondering why some seem to come with an amp?

saintcm · Post by **saintcm** » Tue Jul 04, 2006 7:58 pm

I understand they all did in hese times.

My app burned and now my radio ain't working anymore.

So I guess it's the same issue...

Cheers,

tanick · Post by **tanick** » Tue Jul 04, 2006 10:24 pm

Fixed it. There's a black plastic plug that goes into the DIN plug on the back. I noticed it had 2 pins in it to short two of the connectors. Don't know what it shorts but it works now. I'll look into it after CLM.