Under cover Resto

[Lightweight_911]

.

Glad to hear you've been driving/enjoying your 356 Karl ... & good move on fitting the harnesses (same race-inspired style that I fitted to my 904 & 356 C).


.

[jwhillracer]

Be aware that if you want to compete, you will need 4 point full harnesses.
JW

[hashman]

Thanks chaps.
Neil, there are holes in my rear quarters where there used to be a more normal style belt. There are measurements in the 356 registry book if you need to place them, but I'm sure you know that.
Cheers Andy, how is your Burgundy T, have you done much more to it?
Thank you Jonathan, it was nice to meet you and 911 hillclimber at Shelsley after all this time. I think I have a spare 4 point harness in the draw, but I suppose it will need to be within a certain date too?

Karl

[jwhillracer]

No, dates on belts are only an issue if your car is classified as Sports Libre - the class that Graham’s Lola runs in.

JW

PS - yes it was great to put faces to names and cars at Shelsley Walsh in the Summer.

[hashman]

Back at the end of summer, I managed to buy a new steering wheel. My original one is 420mm, so I bought a 400mm wheel.
There was nothing wrong with the old wheel, just you do feel a bit like a captain of the ship.




I found one in a suitably scruffy condition to match the rest of the car, but it cleaned up well.







Just using T cut, I took the top coat off the centre part, as it was not quite correct in colour, but underneath it was a better match.



Now, don't let the girls tell you size doesn't matter. What a difference. It's only 20mm smaller, and I was wondering before I bought it, will it be worth the money? Well, I'm so happy I got it, the driving experience is made more enjoyable, a little more sporty in feel, and less elbow flapping.




There's just one problem, the indicator cancelling doesn't work, so that will need sorting. But in general a very a happy purchase.



Karl




Sent from my SM-G965F using Tapatalk

[Lightweight_911]

.

Sounds like a worthwhile 'upgrade' Karl - that small reduction in diameter can make all the difference as you've discovered.

It's the same when you swap a std 911 400mm wheel for a 380mm 914 version.


.

[Bootsy]

Never underestimate the difference 2cms can make

[roy mawbey]

Karl,

Well done on all the work, I was lucky my car had a 400mm diameter steering wheel from new. This size was always supplied on the Speedster. I agree with you the smaller wheel feels nice to drive with. I noticed I made some comments on your resto over 12 years ago so you never gave up Karl to get it as you wanted it

Congrats from me

Roy

[hashman]

Cheers, Roy. I don't think I'll ever stop tinkering with this thing...

And just to prove it, I've done some more.
Firstly I changed the rear number plate. The letters were too big, so I wanted proper number plate text, because I had made the old ones up, in a similar vein to Porsche script .
For the old letters, I had made a stencil and sprayed it, this time I thought I'd hand paint it.
I should have practised first, with my pin striping brush, because it was trickier than I thought it would be. In my defence, it doesn't help having large cracks in the surface.
It's a bit rough, or a LOT rough, but it goes with the look of the car.
I also injected more Dinitrol rust converter down into the cracks.
Because the old letters didn't come off as easily as I'd hoped, the background black was more grey primer. So I painted a new black back ground plate also.
Over all, I think it looks ok.

Karl











Sent from my SM-G965F using Tapatalk

[hashman]

Ive added the injection photo



I made my first journey of the year out to Caffeine and machine and coming home in the slight dark discovered one head lamp bulb had blown.




So like David James, I used it as an excuse to put LEDs on the entire exterior lights.
I tried to purchase cheap ones from China, but they only seem to provide 12 volt.
In the end I bought the 6 volt versions from ClassiccarledsLtd.
£157 was quite steep but the peace of mind of a lower current running through the wires is worth it, especially as there are a couple of signs of over heated insulation in places.
Whilst doing this, as some of the more eagle eyed amongst you will have noticed, whilst painting the rear plate, I refurbished the number plate light. The bracket was rusty, so cleaned it and gave a light coating of primer. Originally it's bare metal i think, but as no one sees it, I thought I'd coat it in something to stop the rust.







In the centre should be the reversing light, but in my ownership, there has never been a bulb there, because there is no wire from the reverse light switch. I had considered fixing this, but thought by adding a red bulb here, and feeding a line from the brakes, I could have a third brake light for a bit of extra safety. This worked wonderfully.



Oh and I added some headlight grills that happen to have been sitting in the garage for 20 years. I guess I could call them NOS.
They were a bit loose, so I added some rubber tubing to the tabs at the top..... that'll do.
And knocked out a dent in the headlight rim, but not completely. Don't want to make it too nice.









Thanks
Karl
Sent from my SM-G965F using Tapatalk

[Lightweight_911]

.

Great update Karl - I think the new typeface on the rear plate looks better & the hand-painted finish is totally in keeping with the style of your car.


.

[roy mawbey]

Karl, I agree with Andy it all looks fine for your car!

Well done

Roy