Wiring loom, a couple of oil pipes, coil, 3 pin ecu thing, 6 spark plug HT ends, HT cables, oil sump cover, and a couple of bags of nuts and bolts. Not sure what the silver thing on the right is called, but one of them too
Engine tinware part - new - £10

Late style (for G series car 911.606.112.00) engine temp sensor - new - £20

Distributor cap - New - £5

Inline fuel filter - Free if you buy any other parts

Oil cooler adaptor - I had this made, test fitted it but didn't end up using it. It converts an early oil cooler outlet to use pressure fit oil pipes. £25

6 unused spark plugs - BP5ES. I bought these as spares for my 79 3.2SS engine. £20 for all 6

Clips to hold the air filter to the housings - Sold
NOS red Purolator oil filter in its box 901.107.203.10 - £15

Oil pressure sender - New - £20

Chain cover oil feed bits and bobs - Some new. Most used. £40 the lot

79 SC accelerator cable bracket - £20

PMO adjustable fuel pressure. Comes with a second fuel connector for the fuel return (shown with a blanking plug) - £40

Original Behr engine oil cooler... It leaks (not obvious from where). but presumably repairable. £100

1970 T metal air filter. Very pretty in gloss black. £200


1970 T metal air filter snorkel - Original (right) - £100
1970 T metal air filter snorkel - Modified for performance - guaranteed at least an extra 50 bhp


79 SC cam shafts £150

Prices are + P&P
Please email me on paul.m.norris42@gmail.com if you are interested in any parts. Please also put a reply on this thread so I know who's first if more than 1 person is interested.
Paul

