Bodywork clearout continues: I have this Spot welder and welding tip attachment kit listed on ebay. £475.00 to a DDK'r. Collection only.
See here: https://www.ebay.co.uk/itm/277297052405
Dave
Spot Welder & Attachment kit.
Moderator: Bootsy
-
stretch
- Me and DDK sitting in a tree! KISSING
- Posts: 2908
- Joined: Thu May 21, 2009 2:54 pm
- Location: Kent
Spot Welder & Attachment kit.
70T barn find...... to ST.
1998 C2 996 Kettle
1998 C2 996 Kettle
-
911hillclimber
- Nurse, I think I need some assistance
- Posts: 20690
- Joined: Mon Mar 10, 2008 6:26 pm
- Location: West Midlands
Re: Spot Welder & Attachment kit.
I used one of these spot welders to do a lot on my 911 restoration in the very late '80's.
I hired mine (I was the only person who did apparently) and the welder was SUPERB.
Saves so much plug welding, grinding, and gives the 'factory' weld indentations if that is important.
If anyone is embarking on a big rebuild, this will be an asset as much as a MIG welder esp with a box of arms and tips.
I hired mine (I was the only person who did apparently) and the welder was SUPERB.
Saves so much plug welding, grinding, and gives the 'factory' weld indentations if that is important.
If anyone is embarking on a big rebuild, this will be an asset as much as a MIG welder esp with a box of arms and tips.
73T 911 Coupe, road/hillclimber 3.2L
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9
-
stretch
- Me and DDK sitting in a tree! KISSING
- Posts: 2908
- Joined: Thu May 21, 2009 2:54 pm
- Location: Kent

