my non-Porsche picture of the day

[matteo68]

512S Brands Hatch 1000 kms 1970

[911hillclimber]

[BILLY BEAN]

Really good picture Graham.

[KS]

[Lightweight_911]

.

Considering how small a std Mini seems these days, I wonder what a Minisprint would look like ?

It's a long time since I saw one 'in the flesh' ...

.

[KS]

.

Considering how small a std Mini seems these days, I wonder what a Minisprint would look like ?

It's a long time since I saw one 'in the flesh' ...

.

The word that comes to mind is 'Beautiful'...

[Lightweight_911]

.

I always wanted one ...

The creator - Neville Trickett - was a brilliant designer with his finger in so many 'pies' in the '70's & '80's.

I think I've mentioned it before but I was lucky enough to meet him a few times in the early '80's - via John Jobber who was boss of GP Specialist Vehicles (based in Isleworth not too far from AFN) - when I was building one of their 718 RSK Spyders ...

[KS]

Our paths must have crossed at some point as I was close friends with Baldy, aka John Jobber, and met Neville several times in my Hot Car days. Used to spend a lot of time at GP, even photographing and designing their publicity material. Happy days.

[jb]

Sent from my iPad using Tapatalk

[911hillclimber]

Mini Sprint:
imho nicer with round lights.

Last saw a real one 8 years back, superbly restored.

[hot66]

Mini-Sprint GT (May 1967 - MotorSport Magazine)
Stewart and Ardern transform the Mini bodyshell

When the Mini was introduced most people thought a family saloon car could not be made any smaller if it was to seat four people in reasonable comfort, but someone always has to prove public opinion wrong and the first to do so, we believe, was Neville Trickett. His idea of lowering the car has been put into production by Stewart & Ardern Ltd., the Morris distributors, who skilfully cut the body in two places to reduce overall height by 4 1/4 in.

In fact the demonstration car is 5 in. lower than standard since the Hydrolastic suspension has been dropped, and it drew as much attention in the street as some exotic American cars we have been testing recently – not presumably because it is so startling, rather because it is obviously a Mini … but different. There is a definite trend toward "personalised" popular cars and this one might well catch on in limited quantity despite a large price label which reflects the amount of surgery done on the bodywork.

The basic Mini-Sprint conversion, which costs £335 onto the price of a Cooper or Cooper S, involves cutting the body above and below the waist-line, taking out a depth of 1 1/2 in. at each level and increasing the rake of front and rear windows. The Mini-Sprint GT conversion costing £400 takes an extra 1 1/4 in. from above the waist, making a total of 4 1/4 in., removes all the welded seams which stand proud of the normal bodywork, replacing them by butt or lapped joints which present a neater and smoother appearance. Perspex is fitted in all side and rear windows (the back side-windows no longer hinge outwards) and of course the doors, wings, and boot-lid have all been cut to size. Included in the specification are an acrylic paint finish, in any colour, rectangular Cibie headlights, a small diameter leather-trimmed steering wheel and column rake adjustment.

This is obviously a very sizeable operation and the workmanship is extremely good; it is not possible to see where the cutting has been done. However, despite special optional front seats and rear seat trim, we did not feel that the general appointments of this car lived up to a £1,000-plus price tag and would prefer to spend some of the money on Radford treatment such as nice, well-fitting carpets, soundproofing, electrically-operated windows, an instrument console and so on to make the car feel more luxurious.

Wind noise has been slightly reduced by the elimination of seams, but the 1275S engine in the demonstration car was such a rough, noisy unit – as they all are – that it feels an exciting experience anyway to reach 100 m.p.h. which we estimated to be the maximum speed, an extra three or four miles an hour deriving from smaller frontal area and slightly reduced weight.

Lowered suspension adds to the overall effect but while improving the high-speed handling, it was not ideal for roadwork as the Mini-Sprint was really harsh on bumpy roads and the front wheels sometimes hit the wheel arches. The wheels, incidentally, were magnesium alloy with 4 1/2J rims costing £70 for a set of five.

Individuality costs money and with a car like this it is hard to assess a reasonable price. Considering the work involved the cost is undoubtedly justified, especially since the bare bodyshells can be bought for £230 or £260 depending on the conversion and built up from there, and while we can think of better ways of spending up to £1,250 this is very much a matter of taste. – M. L. C.

[hot66]

I'll be honest, as they're a bit before my time, I didn't know anything about Mini sprints so thought I'd have a read up

[Bootsy]

Sent from my iPhone using Tapatalk

[Lightweight_911]

.

It's a lovely example - but, like many others, it's been for sale for a looong time ...

.

[KS]

Naked Alpine A110...