A few new early 911 parts

Please add Porsche parts and anything you wish to sell here (no commercial sales)

Moderator: Bootsy

Post Reply
User avatar
PMNorris
DDK slapper chatter
Posts: 495
Joined: Wed Jul 10, 2013 5:36 pm
Location: Cobham, Surrey

A few new early 911 parts

Post by PMNorris »

I have a few new parts that I bought in error over the last couple of years that it's too late to return.

Track rod end for non turbo tie rod track rod. Original Porsche part. still with the protective packaging: 911.347.322.04. £53.21 + VAT new. £40 + p&p
Image

Front torsion bar rubber mounts (repro). I have 4 of these. No idea why I ended up with so many! 901.343.792.02. £6.74 + VAT new. £5 each + p&p
Image

Bake pad retaining pin. This one was sent to me in error and is 75mm long. It was advertised as part 901.351.913.13, but that shold have been 82mm, so I'm not sure which caliper this is for: £11.46 + VAT new. £8 + p&p
Image
Image

2x Deser tilting frames for G series sports seats. These were fitted to a G series car before I bought the Deser Sport S seats and fitted them to my 1970 911, so I bought the correct frames for an F series car. These are EUR 400 new + shipping from Italy. I'll take £400 for the pair + p&p
Image

All parts can be collected from Cobham, Surrey instead of me posting them.

Paul
1996 993 Turbo X50 project.... Restoration work in progress!
1970 2.2 911 T / Ex RS Clone, now more original looking, with 1979 3.2 SS engine (sold)
1988 3.2 Carrera Commemorative edition (sold)
Post Reply