2.4S Camshaft

[MikeS911]

Hi All
I am looking for a good very usable 2.4S Cam R/H

Part Number 901.105.168.00.

If you have one could you please send me pics of the lobes etc (mike.spencer.911@gmail.com)

Thanks, hope someone can help. MikeS911

[Ignatzcatz]

Hi Mike, I've got all the 2.4 engine components that came off the case that I rebuilt into a 2.8 engine. All the parts were good but they are in the upper floor of my garage. I'll check part numbers and let you know findings tomorrow ok.

[MikeS911]

Hi
Great thanks, will await your info. Was the engine a 2.4S before the rebuild?
Thanks Mike

[Ignatzcatz]

Hi Mike, I think my engine was only a 160horse E. The cam part number I have is 901 105 133 & 4 OR. Both cams are in good shape, maybe they can be re-ground to an 'S' spec.

[91167coupe]

Hello
I have a pair of MFI S-cams but think they are for 2.0-2.2? Are they different?

[tim69s]

Same

Sent from my Pixel 7 using Tapatalk

[matteo68]

I may still have a pair of 2.4 S cams from the complete but disassembled 2.4S engine I bought from Mike Birtwistle (210bhp) 3 years ago. We only used the crankcases - everything else is type 911/70 2.5 MFI spec.

I’m just checking with Angus to see if we’ve still got them…

[tim69s]

I have a spare RH one, but I'll need to go dig it out of storage to check and photo it.
I've learnt recently from knapman on here that part no 901.105.110.1 was also used by the factory as RH S cam, so is effectively the same part.

Sent from my Pixel 7 using Tapatalk

[matteo68]

These are mine but Angus isn’t back at Greatworth to check them incl part nr until next week